Rewiring door speaker

takamiya

New Member
5+ Year Member
Hi everybody
Could you tell me how to rewire the front door speaker? I need to pass a 2x15AWG cable from my amp to the door speaker. :?:

thank you!!
 

ventturei26

Capt. Fuse
Registered VIP
5+ Year Member
tanke the wire form the amp and place under carpet till u get to the kick panels, then just use a coat hanger to push your wires through the stock grommits where the wires for your original speakers go. or if u want to do it the cheap way take the wires to the deck and find the wires that go to the spearkes and splice them to amp wires
 


ImportFan1

Super Moderator
Staff member
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
i havin the same problem too. i just said f**k it and havent messed with it in a few months
 

cujo613

New Member
Registered VIP
5+ Year Member
takamiya said:
Hi everybody
Could you tell me how to rewire the front door speaker? I need to pass a 2x15AWG cable from my amp to the door speaker. :?:

thank you!!
Im pretty sure in the 96-2000 you do not have a grommett in your door, but actually a din plug that you cant shove anything through. I had to drill to get wires in the door on our 96. It is not fun whatsoever
 


takamiya

New Member
5+ Year Member
snoopy316 said:
Im pretty sure in the 96-2000 you do not have a grommett in your door, but actually a din plug that you cant shove anything through. I had to drill to get wires in the door on our 96. It is not fun whatsoever
Yes this is my problem I have a din plug. So, in this case I don't have any other solution than drill it!!

Thank you snoopy316 !! And thank you too, guys!!
 


Top