Silicone Couplers?

[Tzer]

I found a site lastnight that had 2.375" to 2.00" silicone couplers and I can't find it again :/
I have a reduced coupler that's cracking and the ID of the coupler is 2.375" on the IC side and reduced to 2.00" to the pipe. I see tons of 2.50" to 2.00" everywhere. Should I keep looking for the proper size of my current reducer or will at 2.50" clamp down tight enough and be fine?

Any links for these someone can point me to?

Thanks

Tzer

 

[slowhatch]

get the right size couplers. if they're to big the rubber might fold over it self and cause a boost leak.

 

[Shiznit]

why dont you look for the link in your history?

 

[Mr. Jollypants]

What your looking for is a 60mm to a 50mm or 51mm.. forgot which.. Silicon Reducer Coupler

This is the site that kept coming up..
http://www.motoscope.co.uk/silicone_hoses.htm

Part Number:
SR60-50

 

[Mr. Jollypants]

http://www.hopupracing.com/greddyhardware.html

12400760
That's the part number.

 

[Tzer]

Thanks guys
I didn't figure I wanted to clamp that much bigger of a coupler even though it's not much bigger. Any chance of a leak or blow off would suck.

I did manage to find the site. It was like Turbo Tubes or something like that. I don't remember now. I'm at work

Thanks Error404 for even posting the part number as well as a link

Have a kick ass weekend.

Tzer

 

[Mr. Jollypants]

Thanks guys
I didn't figure I wanted to clamp that much bigger of a coupler even though it's not much bigger. Any chance of a leak or blow off would suck.

I did manage to find the site. It was like Turbo Tubes or something like that. I don't remember now. I'm at work

Thanks Error404 for even posting the part number as well as a link

Have a kick ass weekend.

Tzer

No problem bro