steering wheel

[Grafix Ink.]

does an dc5 wheel fit into my ek.

also which is best you think?

dc2, ek9, or a dc5 wheel to go into my car?

 

[Evan.]

last time I checked, dc / da wheels only fit on EG. I wanted an ITR wheel in my EK, but heard it only fit EG - I was ALMOST tempted to get the EG steering column.

 

[Grafix Ink.]

hmmm anyone else?

 

[Eran]

EK and EP3 wheels fit your column.

 

[Grafix Ink.]

EK and EP3 wheels fit your column.

yes so the ek9 one i know wil fit as they are same as what i have now... is the dc5 close to the ep3 then? thus will it fit? or still clueless about that?

 

[Grafix Ink.]

fck, nvm can't get it...

 

[rupesh52]

bumping up an old thread, just purchased a DC2 ITR momo with the column, will it fit in a 97 EK?

 

[Evan.]

with an EG steering column itll fit.

 

[Rex_89]

Will the DC2 wheel fit on a crx? If not, could I get the EG steering column too?

 

[Evan.]

it wont fit on the EF without some modification (ill check into it), but it might be easier to just get the steering column... I wouldnt want to self modify anything that has to do with safety...

 

[cgpEJ6]

A DC5 wheel will fit in 6th gen Civic no problem just like an EP3 wheel will. If you get the USDM version the airbag has to be rewired though. The JDM and EDM versions are plug and play with a 6th gen though.

 

[rupesh52]

with an EG steering column itll fit.

so this means its a completely worthless purchase without an EG column eh? shucks any other way out?

 

[Grafix Ink.]

bumping up an old thread, just purchased a DC2 ITR momo with the column, will it fit in a 97 EK?

okay.. well i was going to do the dc2 w/o airbag as well as u can read above- it itself is not interchangable the hub is different, but the column is the exact size etc and is perfectly interchangabe with your column, so yes it can fit just replace the whole assembly.

hope that answered your question. i was oh so close in doing it, but didn't.

so yes you can do it, just change the whole colum. different key though unless you open it up and change that as well to your stock one.

i opted to get an ek9 momo wheel which i ran across at work - teknotik.com - a perfect one was found and i opted for that. i like it matches the car perfect. pics to come soon

 

[rupesh52]

thanks a lot guys, will try it over the weekend DIY !!

 

[BuiltforSin]

the ek ctr wheel should fit.