So I put myself on a budget, a time frame, and set amount of money for JUST mugen parts hahahhahaha.
Well, Here is where it starts. Parts are on the way, and no going back now.
96 hatch Midori Green hatch from Kia of Lincoln for a STEAL of a price. Stock condition, body is fairly good, but could use a bit of work. Pretty much wanted to get something to run the 2008 auto-x season in. Stay tuned because Jason from the shop has some goodies for it, ALOT of goodies and I will be updating the thread at least a couple times a week as long as parts keep showing up.
Mod list will be up once the motor is in and I am at a temporary stopping point, until then, will be under wraps except for the people that know the truth bout whats going in.
Mod List:
Engine:
Built Motor
11:5:1 CR Pistons - Bored to 82mm
Eagle H Beam Rods
Polished Shot Peened LS Crank
ARP Rod Bolts
ARP Headstuds
ARP Main's
Moroso Oil Pan
Cometic Headgasket
Blox Stage 2 Cams
Blox Valvesprings
Blox Retainers
Head port work done by KG
Ported OEM Intake Manifold
63MM Throttle Body
Password JDM Whale Penis (Until the Mugen Air Silencer Gets Here)
P-Fab Header
Custom True 2.5" Midpipe
Mugen Twin Loop Axle Back
2mm Oversized SS Valves
Custom 2.5" Test Pipe
OBD1 Wiring Conversion
P28 Chipped and Tuned with Neptune
Integra Type R Dual Bend Shifter
OEM Breather setup replaced with Custom Catch Can off Firewall
-6AN Stainless Fuel Line - Filter to Rail
AEM Fuel Rail (Ordered)
Two -8AN lines off the front of the valvecover to custom Triangle Catch Can made by The Shops Chassis Welder
Powder Coated Valvecover to Match the car (Waiting on fittings to be welded)
Powdercoated Intake Mani (Waitin on it)
Skunk2 Cam Gears
Hasport motor Mounts
Comp Clutch
Comp Chromoly 8lb Flywheel
GSR Tranny
Quaife center Differential
Gator Stage 2 Axles
Suspension/Wheels/Brakes:
Omnipower Street Coilovers
Omnipower Rear LCA's
Omnipower Front UCA Camber Kit
Omnipower Rear Camber Kit
Prothane Bushings
Integra Front Brakes and Spindles
Civic Si Rear Brakes and Spindles
Brembo Blanks (Coming)
Hawk Pads (Coming)
Stainless Brake Lines F/R
Password JDM Front and Rear Strut Tower Bars
Autopower 4 PT Cage with Camera Mount and Harness Mounts
Mugen M7 Wheels - Polished lip with Gold Face (Street Wheels)
5Zigen FNO1RC +33 Offset, 15X7. (R Comp Wheel)
Azenis on the M7's - 205/50/15
V710 R Comps on FNO1RC's - 205/50/15
Exterior:
VIS CF Front Lip
VIS CF Hood
VIS CF Duckbill
Body work and Repainted with fresh Midori (Waiting on room in his shop)
JDM Thin Moldings
SIR F/R Bumbers from PasswordJDM
Urethane CTR Replica Rear Lip
Painted Mirrors, and Skirts
CF Grill
New Windshield (I hate scratches)
Interior:
Recaro SRD Seats - Black with Red Stitch
CTR Rear Seats
CTR FloorMats
Civic Si Cluster
Simpson 4 Pt Racing Harness
Here is a quick picture of it at The Shop. Just put the wheels on that I got from ScionScotty, waiting on the azenis to get here so they go on..
Alright, just another teaser of whats to come... This is a fraction of the carbon thats in store.. This is what is here already.
Motor will be in once the hasports, clutch, flywheel, and Quaife get here. Motor was picked up the other day and will be cleaned extensively. Wont look like that when it goes into the car. Just paid for the breather setup on it. 2 -10 AN fittings off the front of a valvecover to a custom catchcan that the Chassis guy came and measured for yesterday. Once I get the valvecover fittings on, I will be taking the valvecover up to Trail Performance Coatings to get powdercoated as well as MANY other items from the engine bay, and header to get ceramic coated.
Well, Here is where it starts. Parts are on the way, and no going back now.
96 hatch Midori Green hatch from Kia of Lincoln for a STEAL of a price. Stock condition, body is fairly good, but could use a bit of work. Pretty much wanted to get something to run the 2008 auto-x season in. Stay tuned because Jason from the shop has some goodies for it, ALOT of goodies and I will be updating the thread at least a couple times a week as long as parts keep showing up.
Mod list will be up once the motor is in and I am at a temporary stopping point, until then, will be under wraps except for the people that know the truth bout whats going in.
Mod List:
Engine:
Built Motor
11:5:1 CR Pistons - Bored to 82mm
Eagle H Beam Rods
Polished Shot Peened LS Crank
ARP Rod Bolts
ARP Headstuds
ARP Main's
Moroso Oil Pan
Cometic Headgasket
Blox Stage 2 Cams
Blox Valvesprings
Blox Retainers
Head port work done by KG
Ported OEM Intake Manifold
63MM Throttle Body
Password JDM Whale Penis (Until the Mugen Air Silencer Gets Here)
P-Fab Header
Custom True 2.5" Midpipe
Mugen Twin Loop Axle Back
2mm Oversized SS Valves
Custom 2.5" Test Pipe
OBD1 Wiring Conversion
P28 Chipped and Tuned with Neptune
Integra Type R Dual Bend Shifter
OEM Breather setup replaced with Custom Catch Can off Firewall
-6AN Stainless Fuel Line - Filter to Rail
AEM Fuel Rail (Ordered)
Two -8AN lines off the front of the valvecover to custom Triangle Catch Can made by The Shops Chassis Welder
Powder Coated Valvecover to Match the car (Waiting on fittings to be welded)
Powdercoated Intake Mani (Waitin on it)
Skunk2 Cam Gears
Hasport motor Mounts
Comp Clutch
Comp Chromoly 8lb Flywheel
GSR Tranny
Quaife center Differential
Gator Stage 2 Axles
Suspension/Wheels/Brakes:
Omnipower Street Coilovers
Omnipower Rear LCA's
Omnipower Front UCA Camber Kit
Omnipower Rear Camber Kit
Prothane Bushings
Integra Front Brakes and Spindles
Civic Si Rear Brakes and Spindles
Brembo Blanks (Coming)
Hawk Pads (Coming)
Stainless Brake Lines F/R
Password JDM Front and Rear Strut Tower Bars
Autopower 4 PT Cage with Camera Mount and Harness Mounts
Mugen M7 Wheels - Polished lip with Gold Face (Street Wheels)
5Zigen FNO1RC +33 Offset, 15X7. (R Comp Wheel)
Azenis on the M7's - 205/50/15
V710 R Comps on FNO1RC's - 205/50/15
Exterior:
VIS CF Front Lip
VIS CF Hood
VIS CF Duckbill
Body work and Repainted with fresh Midori (Waiting on room in his shop)
JDM Thin Moldings
SIR F/R Bumbers from PasswordJDM
Urethane CTR Replica Rear Lip
Painted Mirrors, and Skirts
CF Grill
New Windshield (I hate scratches)
Interior:
Recaro SRD Seats - Black with Red Stitch
CTR Rear Seats
CTR FloorMats
Civic Si Cluster
Simpson 4 Pt Racing Harness
Here is a quick picture of it at The Shop. Just put the wheels on that I got from ScionScotty, waiting on the azenis to get here so they go on..
Alright, just another teaser of whats to come... This is a fraction of the carbon thats in store.. This is what is here already.
Motor will be in once the hasports, clutch, flywheel, and Quaife get here. Motor was picked up the other day and will be cleaned extensively. Wont look like that when it goes into the car. Just paid for the breather setup on it. 2 -10 AN fittings off the front of a valvecover to a custom catchcan that the Chassis guy came and measured for yesterday. Once I get the valvecover fittings on, I will be taking the valvecover up to Trail Performance Coatings to get powdercoated as well as MANY other items from the engine bay, and header to get ceramic coated.
