Turbo Question

[4gcivic69]

would this be a good mate for my a6 or would this be to big basically i want a decently quick spooling turbo and i want to know how this one would be on my d.. CLICKY

 

[Steven.]

looks good, its smaller then the one im gettin.
it shoudl be good for the a6, you can get the same turbo off ebay cheaper

 

[catsman72]

http://cgi.ebay.com/ebaymotors/45-Trim-T3-Turbo-Stage-III-48-Brand-New-CIVIC_W0QQcmdZViewItemQQcategoryZ33742QQhashZitem150086598552QQihZ005QQitemZ150086598552

 

[4gcivic69]

oh well this is waht i was thinkin about buyin once i got the money.. http://www.xs-power.com/honda/honda004.html

 

[Steven.]

http://cgi.ebay.com/ebaymotors/45-Trim-T3-Turbo-Stage-III-48-Brand-New-CIVIC_W0QQcmdZViewItemQQcategoryZ33742QQhashZitem150086598552QQihZ005QQitemZ150086598552

same one as the link he posted, both XS power.

i ordered the XS power T3/T4 T04E Turbocharger A/R .50
http://www.xs-power.com/turbos/turbo003.html

 

[Steven.]

oh well this is waht i was thinkin about buyin once i got the money.. http://www.xs-power.com/honda/honda004.html

dont get the manifold, just get the turbo, get a ebay log manifold, and the turbo with that on a non built a6 will probly be laggy

 

[4gcivic69]

dont get the manifold, just get the turbo, get a ebay log manifold, and the turbo with that on a non built a6 will probly be laggy

so get a log manni from sum where with that turbo on a stock a6 and it should spool quick is what your sayin

 

[4gcivic69]

or how bout sumthin like this.. Garret t3 click

 

[TiiM iiS l3eAsT]

even better^^^ i like the turbo way better than the xs power.........go with the garrett.....

 

[4gcivic69]

yea either way it all depends on the funds i have once i actually start buyin turbo parts

 

[catsman72]

garrett is 1000000000000000000000000000000000000 times better

 

[Steven.]

im goign to run a XS turbo, if it blows, it blows.

 

[ryanM]

i dont know if i would trust an XS power turbo.

im using an xspower manifold and wastegate, but i wouldnt use a turbo from them.

 

[Steven.]

lol, oh well, im still goign tot run it, maybe change the seals before install,
id run the turbo, before manifold.

 

[ryanM]

lol, oh well, im still goign tot run it, maybe change the seals before install,
id run the turbo, before manifold.

ehh, a cracked manifold isnt that hard to fix, but xspower turbo's have a reputation of eating themselves. i would do a rebuild with a garrett center section i were gonna run a xspower turbo

 

[4gcivic69]

im goign to run a XS turbo, if it blows, it blows.

i totally agree im gonaa run an xs too nd if it blows it blows.. ill rebuild it or get sumthin better