turboedit and ostrich

[gospeed]

when i start dataloging it doesnt work all gauges frozen speed 171 at idle throttle 71 . tps calibration both windows say 191 . anybody had this problem too. also anybody had any start run issues with the ng60 bins. took a while to find a bin that would actually idle/stay running. any positive input would be greatly aprreciated

 

[Steven.]

NG60 does have idle problems, NG55 is good though.

the data loggin problem could be a number of things, bald solder job, the settings on the bin and whatever.

 

[ryan89crx]

are you using the ECUcontrol plugin for TE? or are you using the standalone program?

the plugin that i have doesnt even support the gauges, although there might be a newer version of it that does...

i dont see how any of your problems would have to do with the Ostrich though...

 

[Steven.]

i know when i used ecucontrol, i use the standalone.

 

[gospeed]

green do u still use TE or using something else. i cant seem to make a bin that will work right,changes in rtp dont always work or something im soon at the end of trying every thing i know with this, i guess it aint as easy as i thought

 

[ryan89crx]

green do u still use TE or using something else. i cant seem to make a bin that will work right,changes in rtp dont always work or something im soon at the end of trying every thing i know with this, i guess it aint as easy as i thought

chances ar you have some buggy programs.

what version of TE?
what version of ECUcontrol?
plugin or standalone?

 

[gospeed]

im using TE 2.6.1 download from xenocron website not using ecucontrol .dont know what u mean by plugin or standalone . my set up is pm6 socketed,ostrich and laptop. played with the numbers great idle now almost perfect but runs like s**t no boost over 10 misfire real bad or somtin ,revs up a bit between shifts too the list goes on just problems in general. do these programs always give problems , i have seen different opinions what is the best bug free to use for obd 0, been thinking of switching to obd 1 just need harness

 

[ryan89crx]

im using TE 2.6.1 download from xenocron website not using ecucontrol .dont know what u mean by plugin or standalone . my set up is pm6 socketed,ostrich and laptop. played with the numbers great idle now almost perfect but runs like s**t no boost over 10 misfire real bad or somtin ,revs up a bit between shifts too the list goes on just problems in general. do these programs always give problems , i have seen different opinions what is the best bug free to use for obd 0, been thinking of switching to obd 1 just need harness

how did you set up your basemap?

 

[gospeed]

used import/ export function following xenocron how to make basemap instructions

 

[ryan89crx]

used import/ export function following xenocron how to make basemap instructions

try the "basemapper deluxe" found on his site. i use that on all my new basemaps and they work great.

its an Excel program, then you jsut cut/paste it into the ng55/ng60 rom

 

[gospeed]

i tried to download excel and it said my windows 98 wouldnt support it. hopefully if my cousin comes over we will try on his laptop its newer than mine.

 

[ryan89crx]

if you want me to make you a basemap that might run better, post your complete setup...

what % fuel were you running, 120%?

 

[gospeed]

what is the current working version of TE i have found info on newer one than i have but cant find download ,which is the best version to use bug free, yes id like to try another basemap i was using 115% .found a bin that makes it run pig rich. but fixed other problems launch control acually disengages now, will make boost up to 10 now. my set up is 91 crx si, d16y8,dx 5sp , ihi rhb5(small turbo), 450cc ,pm6 ,vafc 2 all settings at 0 now,msd btm -.25 / lb starting at 2
thanks for the help much appreciated

 

[Steven.]

i know for a fact NG55 basemaps idle good.
latest version 2.5.5 of turbo edit http://forum.pgmfi.org/viewforum.php?f=39&sid=5594d0290a078221ece91912de63f195

 

[gospeed]

on xenocron website he has most current stable TE for download with his excel basemapper been using that TE 2.6.1 and downloaded also 2.5.5 from pgmfi, neither one datalog works for me using ecucontrol plugin. found a bin on one of the threads on pgmfi idles great think i had to lean out a bit but is good(best its ever been lol) the fuel is the easy part, its the ignition tables i dont like,i miss vacuum advance. actually i have a dist. from a japan engine fits the y8 head but no sensors in side it, i always wanted to try this thing what do i do about cyl,tdc,crank anybody know maybe msd crank trigger