turn signals quit

[R3dline]

ok i wired my fog lights into my turn signals, they worked perfectly last night, today nothing works, when you turn the lights switch to the first setting the one that just turns the corner lights gauges, and rear lights on, and not the headlights, nothing works. any ideas? only reason i wired these into my turnsignals, was because i have no open spaces in my dash for the button, so i figured id just do it into the turnsignals so they would come on when i turned them on . guess that was a mistake someone give me some help here

 

[lethal6]

Blown running light fuse? My quick guess if they worked fine last night and now they don't, a wire grounded out and blew the fuse.

 

[momoxsparco558]

Running light fuse or check and make sure your relay goes click click because it could be bad luck and relay quit

 

[R3dline]

re taped all my conncections, checked fuses, figured out i had a blown 10a fuse, number 19 on this chart, so if anyone else has this problem, this is the fix, everything is working again after i changed the fuse,

 

[lethal6]

Sweet! Glad it was a fairly easy fix. Must have had a loose connection that caused the fuse to blow.

 

[xWIREMANx]

If you didn't use a relay you could also have been pulling too much current from that circuit (more than the 10amp fuse) and that will pop the fuse.