civicexkid
New Member
i bought a 2000 white ex 5spd with 124000 miles on it. it was all stock except for a set of ngk plug wires neuspeed strut bar and ebiach sportline lowering springs sitting on kyb gr-2 shocks. when looking at it from behind the car is lower on the drivers side but only on the rear. the drivers side front and pass front are fine. i searched and found people saying the lca were flipped or bushings were left out but the bushings are on both sides and the lca dont look wrong? it seems many people have this problem but im at a loss right now. the guy who did it put spacers between the tie rod (or toe arm?) to help with the camber but i dont think that would make it lean since there the same width on both sides. any help would be great.