which turbo kit?

Which turbo kit?

  • Drag

    Votes: 5 31.3%
  • Greddy

    Votes: 7 43.8%
  • Fmax

    Votes: 0 0.0%
  • Revhard

    Votes: 4 25.0%

  • Total voters
    16

CivicLX97

New Member
5+ Year Member
10+ Year Member
ok im goin to turbo and wanna know which kit is the best...with regards to ease of installation, power, reliability, need for tuning, ect....im going to be keeping the kit stock and not really messing with it once its on there...greddy, drag, revhard, Fmax(turbonetics)?
 

Shiznit

Stickin it to the Man
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
20+ Year Member
custom, but if i had to pick probably drag
 


Ravage70

New Member
Registered VIP
5+ Year Member
10+ Year Member
kits suck but revhard makes the best one

once again kits suck
 


Handlebars

None Taken.
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
Shiznit said:
custom, but if i had to pick probably drag
uhh, worst manifold ever. for a bolt on kit for boost newbies, greddy is the best. otherwise, custom is the only way to go.
 

LatinEM2

La Raza #2
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
Full-Race if you have the money...=0
 

Going-West

Tree people on my radio
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
revhard out of those, but full-race makes the bst kit out there IMO, if you got the $$
 

bmyers4321

timmy the testie rules!!!
Registered VIP
5+ Year Member
10+ Year Member
id say go with the greddy kit. its probly the most affordable. unless you plan to spend more money on one.
 

HiGH_CiTY

Lock It Up!
Registered VIP
5+ Year Member
10+ Year Member
if u dont plan on upgrading the parts eventually . . . i'd just go w/ the greddy. install is easy and its pretty reliable if the boost is kept low. the only thing that sux is it doesnt come w/ an intercooler. for best results u should really get it tunned properly w/ uberdata / hondata

full race kits are def the best kits out there but def NOT for what this guy is looking for.
 

CivicLX97

New Member
5+ Year Member
10+ Year Member
yeah i heard that drag kits' manifolds tend to crack....so far its either rev hard or greddy...anybody have any opinions on fmax it uses turbonetics parts, it was recomended to me by a local shop because of good top end power and the fact that it comes with msd boost retard
 

CivicLX97

New Member
5+ Year Member
10+ Year Member
if i had the time i would definitly be making a home made kit but i dont have the time, im only home for a few months from school and defintely want boost fast....ill probably buy it off URL=http://www.turbokits.com]www.turbokits.com[/URL] unless people have other suggestions
 

civicsi94

dial up ownz me
Registered VIP
5+ Year Member
10+ Year Member
depends what ur plans are. if u are gonna build the motor then go custom or drag and fmax. if u are gonna have a stock motor get the greddy kit. cheapest place is www.city-speed.com u will still need to get a fmic and bov though. its reliable and emissions friendly.
 

racerx661

certified pervert
Registered VIP
5+ Year Member
10+ Year Member
i would do a piece together kit.....full race is over priced...drag and revhard are decent....greddy is emissions friendly...but who gives a f**k about emissions
 

CivicLX97

New Member
5+ Year Member
10+ Year Member
yeah im from new jersey so it doesnt need to be emissions friendly, im just looking for the most reliable stock power with little tuning needed
 

riciv97

New Member
Registered VIP
5+ Year Member
10+ Year Member
Custom kit would be a whole lot cheaper and you can get the setup exactly how you want it to be!
 

krayziejcs

.
Registered VIP
5+ Year Member
10+ Year Member
greddy is my pick
especially since you said you dont have time to piece one together
 


Top