Will this fit?

[clover ej6]

Will a Garrett T3 Super 60 fit on a Turbo manifold/Downpipe/Dumptube combo like this one?

http://store.straightlinespecialties.com//product_info.php?cPath=33_89&products_id=239

 

[Steven.]

probably, email them and ask.
i plan on running there log manifold with a t3/t4

 

[Shiznit]

yes it will. make sure the turbo has a 4 bolt outlet

 

[clover ej6]

Yeah thats the setup I plan to run once I do my mini-me swap and save up enough money. Green 91--What are your horsepower goals for your setup?

 

[Steven.]

around 300whp.

 

[clover ej6]

Do you think I'll be able to accomplish that same goal on a d16y8 with a zex cam, eagle rods and arias pistons with a t3 super 60 as a daily driver and then be able to turn up the boost and run 350 whp for the track?

 

[got traction]

turbo lag like a mofo though

 

[clover ej6]

Turbo lag with the super 60? It's not a big turbo though?

 

[jason_guy_yeah]

It's because it's on a d-series

 

[TiiM iiS l3eAsT]

well im glad im sticking with my 42/48 lol have fun with lag

that turbo will max out at around 300-350....i wouldnt run more than 20 lbs on that turbo....after 20 it probably starts blowing out hot air....

 

[Steven.]

super 60 on my bros d17 full boost by 3000rpm

 

[TiiM iiS l3eAsT]

thats only 5 psi lol....

 

[Steven.]

no when it spiked to 15 it was full by 4000.

 

[TiiM iiS l3eAsT]

nice...

 

[clover ej6]

Yeah that's pretty nice. Idk if I want to do the Super 60 anymore though. Any suggestions on what i should do?

 

[Shiznit]

hybrid or disco potato

 

[TiiM iiS l3eAsT]

disco potato ftw!

 

[killer_siller]

with the GT28RS you're going to need a T25 manifold

that manifold actually looks pretty good!

 

[mike@synapse]

u can get a gt28rs in a t3 hot side

 

[killer_siller]

u can get a gt28rs in a t3 hot side

*doh* i knew this, i don't know why i said otherwise. you are correct.

just in case you WANTED to go t25, i'm sure those manifolds are made-as-ordered, and i'm sure you can ge them to weld up a t25 flange. that would also be eliminating the wastegate on the manifold and cleaning up the engine bay a little bit.