wiring tuck

[cas9889]

im getting ready to tuck my bay and i don't know what size heat shrink tubing i should go with for the individual wires i will be cutting and soldering smallest i have found 3/64", 1/16", and 1/8" i was thinking 1/16 any ideas?
here is the site i am getting it from
http://www.mbelectronics.com/view.aspx?id=207

 

[mymmeryloss]

i would get 1/8 and 1/16th...

 

[Genuine Rolla]

^^

That sounds about right. I think there is a tuck thread on here and on honda-tech. I'm sure there's a whole slew of information that yo ucan find there.

 

[mymmeryloss]

ya there is a really good one on hondatech..
ask a vw guy and he will be able to tell u anything about a tuck too...

 

[Steven.]

1/8 is to big for single wires, 1/16 or next size smaller down from 1/8 is good, trust me i had to wire up my b18c1 in my crx and i used alot of heat shrink.