Boosting/Building (My setup)

[FrancesTheMute]

Just curious to see if anyone could guesstimate the numbers for me. I've been planning on picking up another D16Y8 once I get home. After reading Honda-Tuning for a while I decided to give the little D a shot. Here is the setup as planned.

Full-Race T3 ProStreet Manifold
3" 4-bolt Downpipe
3" Thermal Exhaust
Intercooler 20"x8"x3"
Full-Race T3/T04E Turbo (Not sure on trim yet)
Edelbrock Intake Manifold
K&N Filter
Tial 38mm Wastegate
Tial 50mm Blow Off Valve
2.5" Intercooler Piping
Vitarias Pistons
Eagle Rods
Valve Springs
Retainers
Stainless Steel Valves
Walbro 255lph Fuel Pump
450cc Injectors
Hondata S300

I figure I'll keep the stock interior, A/C, and PS, with the car tuned to about 9psi. My goal is around 250hp/200tq. Also, anyone have any suggestions for parts I could add or I left out? Forgive my noobness with the D.

 

[FrancesTheMute]

A few people I've talked to have told me to consider DSM 450's...that just seems like too much fuel to me. Anyone have any experience. I guess I could just f**k with the fuel map though.

 

[Shiznit]

youll need 450's for 250whp

 

[TiiM iiS l3eAsT]

dsm 450cc max at around 300hp.....i think there perfect for any stock D setup.....or even for what ur going for, there good injectors.....i plan on using dsm 450cc bluetops on my setup.....10 psi on a T3 on a stock DOHC ZC.....hoping to make around 200hp-230hp.....

for what u have i would upgrade injectors to around 660cc and run around 15-18 psi and make around 350whp.....if ur building ur block why are you running such a low psi?

 

[Shiznit]

also its vitara pistons and eagle rods. not the other way around lol

 

[TiiM iiS l3eAsT]

haha good catch^^^

 

[FrancesTheMute]

also its vitara pistons and eagle rods. not the other way around lol

Yeah, that was the recommendation I got from the guys on D-series. I plan on keeping the boost low at first just to see how she'll run. After a while I may push it up a bit. I've ran 240's on 300-350hp before, and it ended with some bad luck on the track. I'm trying to cut my power down a bit. I'd like to be able to keep up with the a*****e V8's in my area.

 

[Shiznit]

so someone recommend eagle pistons and vitara rods? eagle doesnt make pistons and vitara rods wont fit.

 

[FrancesTheMute]

so someone recommend eagle pistons and vitara rods? eagle doesnt make pistons and vitara rods wont fit.

No, you can blame that on my inability to type.