Well I figured I'd post up some pics of my car since I've never done it before and I just finished putting on my new exhaust. I'll keep updating this as I upload some pictures I have saved.
Exhaust
New exhaust:
Updated:
Exhaust on pictures:
Cracked Exhaust Manifold
Pictures of old exhaust and the holes it accumulated
Vanilla Coke anyone?
Holy rusted cat batman!
Intake
I installed a Y8 IM a couple weeks ago and took some after the fact pictures with my jury rigged throttle linkage.
More stuff to come later.
What's this? 9/26/07
Is that a...
why yes it is
Me and my roommates 240
Sorry for the crappy pic but out of the crappy pics I took that was the best looking crappy one.
Headlight Update
I did some work to my headlights while I wait for a couple parts. Again sorry for the shitty pictures, the light was coming in at a weird angle.
I used 220 grit sand paper to get the chrome off the inner housing and then used 3 coats of Dupli-Color Sandable Primer. I then sanded the primer a bit to make it smooth and then did about 6 coats of Dupli-Color Gloss Black Engine Enamel (for the high temp). Took me in total of about 4 hours (includes dry time in between coats).
Exhaust
New exhaust:
Updated:
Exhaust on pictures:
Cracked Exhaust Manifold
Pictures of old exhaust and the holes it accumulated
Vanilla Coke anyone?
Holy rusted cat batman!
Intake
I installed a Y8 IM a couple weeks ago and took some after the fact pictures with my jury rigged throttle linkage.
More stuff to come later.
What's this? 9/26/07
Is that a...
why yes it is
Me and my roommates 240
Sorry for the crappy pic but out of the crappy pics I took that was the best looking crappy one.
Headlight Update
I did some work to my headlights while I wait for a couple parts. Again sorry for the shitty pictures, the light was coming in at a weird angle.
I used 220 grit sand paper to get the chrome off the inner housing and then used 3 coats of Dupli-Color Sandable Primer. I then sanded the primer a bit to make it smooth and then did about 6 coats of Dupli-Color Gloss Black Engine Enamel (for the high temp). Took me in total of about 4 hours (includes dry time in between coats).
Last edited: