Crome; How to add Boost Tables
Well got bored, messing with Crome.this is a how to on adding boost tables, mainly to non P30/P72 BINs.
involves exporting/importing maps from non P30/P72 BINs.
If you are going to use the P30 or P72 maps anyway, Skip to step Step 12
1.Ok to start, Open Crome, will look like this:
2.Next, Click File>Open.
3.Select the map you want to add boost tables to, then click open, Here i open OBD1 DOHC ZC P29 BIN.
4.When Opened, will look like this.
5.Next, Click File>Export Tables.
6.Then, Save the file as whatever tables(maps) they are.
7.Once that is done, Click File>New.
8.Boost maps can only be added to P30/P72 BINs, so we open either a P30 or P72, here i used the P30 Bin, Either will work.
9.When open, it should look like this.
10.Then, we Click File>Import Tables.
11.Click the file you saved earlier.
12.Should look something like this.
13.Ok, now on to actually adding boost tables. Click Plugins>Advance boost tables.
14.This should popup next, Click next.
15.Here, we can choose what MAP sensor being used.
16.Then, we choose what MAP we will be using with our setup, i will use a GM 3 Bar MAP, but choose what you use/will be unsing.
17.Click next, Then choose how many boost columns you want, i choose 14 boost columns.
18.Click next, then reed the next screen, then click next again. As seen below, i have added Boost tables.
19.Then as you read on the last screen of the Advance Boost tables screen, Click Tools>Boost Tables Adjustments.
20.Here you can make no changes, or adjust what you need, when done click OK.
21. ALL DONE, now go through, start tuning, make necessary VTEC and what not adjustments.
P29 Maps/w 3bar Boost tables
Hope This helps some people with this, I've seen posts with people asking how to.
*Disclaimer:I am not a pro a Crome, so please, don't contact me asking how to tune it, or do other things, as i probably will not know.*
If there are errors, please contact me via PM.
Last edited:
