Im kinda new to forced induction and really dont know what turbo/specs to go with for my car its a 96 coupe with b16 swap the engine has stock internals and the mods on it are basically every bolt on you can get. I want to have around 250whp at 7-8psi and am looking for a turbo to do that, but during the winter the internals will be built and I want a turbo that can be able to handle around 350whp, this car is now my summer daily. I dont want to spend a crazy price on a turbo and was looking at rebuilt garretts so if someone knows a good setup for what i want i would really appriciate some help. And also if anyone knows a place to get the turbo for a good price.
Need some advice...
- Thread starter dondon360
- Start date
beesandgoats.com
Billy.
Has returned ;-)
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
20+ Year Member
x2. a 57 trim t3/t04 will most likely suit your needsbeesandgoats.com
i would suggest a new garrett 50 trim turbo. a few of the other parts you can cut corners and get used, but you wont save much buying a rebuilt vs a new one. its only 599 for a brand new Garrett 50 trim.
it wont have a problem reaching your 350whp goal. if you want more than that like mugen suggested a 57 trim might be better.
the most important part of a good running turbocharged honda is the tune. make sure you dont cheap out on the engine management. honda has a good selection of affordable tuning solutions that will work great, IE hondata, neptune, even crome pro.
if you have any questions pm me and maybe i can help
it wont have a problem reaching your 350whp goal. if you want more than that like mugen suggested a 57 trim might be better.
the most important part of a good running turbocharged honda is the tune. make sure you dont cheap out on the engine management. honda has a good selection of affordable tuning solutions that will work great, IE hondata, neptune, even crome pro.
if you have any questions pm me and maybe i can help