My Last Dyno Day!

[ryan89crx]

i think your dyno reads a TON high. 8.5:1 compression in a stock head d series(and a dohc one at that) will yield nowhere near those results. i would guess closer to 210-215whp

i guess when you get 1/4 miles results we will know a closer estimate

 

[majorahole]

i would be worried about those rods, if it is in fact 270whp

 

[hondaSi_col]

GUYS!!!! I WAS WRONG!!! SRRY! I MADE THE CONVERSIONS BAD!!

THE RESULTS WAS

265Whp = 14 psi...

srry guys i was wrong, but i think its a good thing cause i got sotck internals

but an not gonna race with 14 psi...

max max 12 psi cuase the rods are weak...

u know what is the limit of the rods and the block??..with a good tune with crome? let me know plz!

 

[hardcore97]

alot of people say 200 is pretty close to the limit. i have a book at home thats you shouldnt go past 200whp on a dseries because of the weak rods. but ive heard 225 . i still say low 200s to be safe

 

[ryan89crx]

id rock 250whp and not look back. anything more is too risky for me

 

[hondaSi_col]

id rock 250whp and not look back. anything more is too risky for me

ok thats right for me, the max max boost am gonna put with GOOD gasoline its 12 psi, the dyno number was 232Whp... so u think its ok going to the 1/4 of mile tomorrow with thatt boost and good gasoline??...

 

[PhntmSk8r]

12psi is only getting you 270whp?

what turbo are you running?
are you tuned?

if you are tuned, are you running a GOOD tune?

 

[hondaSi_col]

12psi is only getting you 270whp?

what turbo are you running?
are you tuned?

if you are tuned, are you running a GOOD tune?

dude i was wrong! look the updte the top of this page!....
vids soon!!

 

[Steven.]

what pistons do yo uuse?
i though i read you use vitaras?

your CR is probably uber low. raise it up some and you will yield more power

vitaras in DOHC ZC(or similar, A8) yield LOW 7:1 CRs