ok my car is throwing a code 22 which is vtec oil pressure but vtec still kicks in i duno if vtec is only half way kicking in or what but i can definutly here it and feel it
code 22
- Thread starter 96sohccivic
- Start date
hes hitting vtec so his oil level has to be fine, and you wont halfway hit vtec, you either will or wont, so i dont know why it would throw that code, other than having low oil pressure but still enough.
yea i know it gots good oil level i just rebiult the engine and put oil in it it has a unchipped p28 ecu
the person that had the car before me wired it in but i think its wired wrong
alrite so my check engine lite was on so i checked for codes code 22 came up so i thought maybe the buddy club vtec control is hooked up rong so i looked online for a diagram so i can rewire it i was thinkin the buddy club controler is hooked up wrong and thats what is makin the code 22 come onalright. please post then entire story and I'll try to help. im not going back and forth with you to try and figure out the problem over the internet.
plus, i kinda get the impression that you really don't care...
ok i fixed the problem the people that wired in the vtec controler just wired it to the vtec instead of hooking up the wires from the ecu and the vtec