How much did your setup cost?

[XpL0d3r]

How much $ TOTAL did some of you spend putting together your turbo setup? Just curious to see how much some of you all spent...

 

[jdm98coupe]

i got a good deal on one with a trade for a full kit n so far ive spent about $300-$400 on misc. parts. but if you can find some good deals id say you could spend maybe $800 maybe on a pretty decent kit.

 

[got traction]

ALOT!

manifold, turbo, dp and bov - 600
wastegate - 280ish?
fmic - free (trade)

block - free
rods - 300
pistons - 150
rings - 50
bearings - 75
arp head studs - 80
oem headgasket - 35
block work (notching etc) - 400
fresh vtec head - 300
hondata s300 - 595
p28 ecu with obd1-obd2 harness - 180
hondata 3bar map sensor - 80
dyno tuning - 400


...umm...i really cant think of anymore (but i know there is) i've been up hella long



TOTAL: 3525

 

[ryan89crx]

^^OP said turbo setup, not built block

Turbo - $300
manifold - $75
charge piping, DP, couplers, clamps - $125
WG - $75
BOV - $60
FMIC - $100
RC injectors - $150
obd1 conversion - $100
chipped ecu - $100
misc other things(estimate) - $50

Total - $1135 or so

 

[boosted to 26ps]

complete 2.4l dart block with crower internals and je 8.0-1, complete dart vtec head with crower cams built by race engineering---little over 7 grand (waiting for it to arrive)
turbo mani---300 (crappy one tho)
turbo (super t-50 a/r hot .84, a/r cold 50.....stage 5 wheel)---1,500
downpipe---free
exedy twin disc clutch kit---1,000
axels---750 per axel
avid motor mounts---500 (complete motor/trans and a hydro to cable conversion)
chipped ecu---150 (reprogramable)
wastegate---250 (50mm)
blow off valve---150 (super rfl.....getting rid of it for greddy)
str cam gears---100 (waiting for motor to arrive)
str intake mani---150 (used, waiting for motor)
800cc injectors---600 (cleaned and tested.....additional 300)

theres more but cant think right now

 

[ryan89crx]

complete 2.4l dart block with crower internals and je 8.0-1, complete dart vtec head with crower cams built by race engineering---little over 7 grand (waiting for it to arrive)
turbo mani---300 (crappy one tho)
turbo (super t-50 a/r hot .84, a/r cold 50.....stage 5 wheel)---1,500
downpipe---free
exedy twin disc clutch kit---1,000
axels---750 per axel
avid motor mounts---500 (complete motor/trans and a hydro to cable conversion)
chipped ecu---150 (reprogramable)
wastegate---250 (50mm)
blow off valve---150 (super rfl.....getting rid of it for greddy)
str cam gears---100 (waiting for motor to arrive)
str intake mani---150 (used, waiting for motor)
800cc injectors---600 (cleaned and tested.....additional 300)

theres more but cant think right now

a lot of this doesnt make sense...

$1000 for a twin disk? should be at least $200+ more than that
$750 PER axle? are they made of titanium?
$600 for 800cc injectors? are you buying 12 of them?

 

[denracho]

lot.. yup thats too much too pay for that s**t... are they made of gold and titanium? lol

 

[TiiM iiS l3eAsT]

Garrett T3 Turbo- 106
HF Manifold- 37
CXRacing Intercooler- 86
Adapter Plate- 60
Hallman MBC- 50
Water Lines- 5
Oil Feed Kit- 50
DSM Injectors- 85
Piping- 85
Reducer coupler- 28
Type-S adapter- 20
Greddy Type S- 145
Gauges- 133
Sparkplugs- 12
Gaskets(T3 and HF)- 10
PM6 Ecu- 35
2.5” Cat-back- 200
Oil Return- 10


Total So Far: $1147

 

[boosted to 26ps]

a lot of this doesnt make sense...

$1000 for a twin disk? should be at least $200+ more than that
$750 PER axle? are they made of titanium?
$600 for 800cc injectors? are you buying 12 of them?

got a deal on the clutch kit, the axels are stage 5 axels, and i got rapped on the injectors.....that i know of already.