ok so i am going to be turboing my car in about a month and i will be ussing 450cc dsm's. i am wondering if i can get the basemap for the turbo setup now and run the ecu on my stock motor with the 450's till i get the setup installed.
running turbo basemap on stock motor
- Thread starter kilas4doorsleep
- Start date
lol, thats exactly what he was asking...
in theory, it should work. but without knowing how close your afrs are to being dead on, i wouldnt do it. just wait and do it all at once, then immediately get it tuned
no
leave it alone for now.. dont run a turbo map on a non-turbo car
leave it alone for now.. dont run a turbo map on a non-turbo car
well said haha
I don't see why you would run a turbo map on a N/A car.. it makes no sense.
With a basemap you shouldn't be driving your car all around, it's just for you to drive directly to your tuner to get it tuned.
With a basemap you shouldn't be driving your car all around, it's just for you to drive directly to your tuner to get it tuned.
basemap doesn't have maps for +1 psi for fuel and timming...detonation = no engine.
You can in theory drive the car on a bigger injector basemap. I wouldn't call it a boost basemap, but a basemap scaled for bigger injectors and boost tables added you could get away with.
Way back in the day I drove for almost 6 months on a basemap with the stock o2 sensor still enabled.
Way back in the day I drove for almost 6 months on a basemap with the stock o2 sensor still enabled.
i have already figured out what i was going to do about this situation im getting a chip made just to compensate for the larger injectors on the stock motor and i am going to get a chip for the turbo setup and install that chip when i install the turbo.