H22TCH, Dutch civic update

[JaPpEr]

It's been a while since I showed you guys what up with my car. first things first, here are a few picture of how it looks like now,

A few months ago the H22a swap was finished and running very nice. After that I got a P28 ECU with ECtune on it (h22 basemap). Than I finally got my set of 16" 002's

After that my girl bought a 91 CRX with a D16Z5 engine (I believe that's a ZC engine) Plans for that are building it for 300PK on boost.




2 weeks ago we had a meet in my town, here are the video's,

movie 1
movie2


Hope you guy's like it, feel free to comment!

 

[PhntmSk8r]

mmm yes, h22 brotha

sick car man!

Any engine shots?

Also, you still have a little bit of rev room left before the powerband drops off (unless its tuned differently). My powerband doesnt drop off til about 7900rpm. Play with it, see if it still makes power that high. It can take it, trust me

Looks like some wheel spin when vtec kicked in 2nd maybe?

 

[JaPpEr]

Thanks man!! the engine bay is really a bit of a mess, so I rather don't post up some pics Bur If everything goes to plan the engine cover will be painted inspired on a zero fighter plane very soon. and hopefully I can do something about all the wires and ugly hoses...

Could be I had wheelspin in 2nd,.. it was on 14" steeles with 175 tires on it so didn't have much grip.. don't know were the power band ends tho, haven't got it dynoed, but I will take your advice and go up a few hundred.

If got a question, do you have HASport motor mounts? Does your dash and door panel shake if you accelerate from 2500-3200 rpm??

Thanks!!

 

[EK|B]

Looks clean. Good work.

 

[PhntmSk8r]

Thanks man!! the engine bay is really a bit of a mess, so I rather don't post up some pics Bur If everything goes to plan the engine cover will be painted inspired on a zero fighter plane very soon. and hopefully I can do something about all the wires and ugly hoses...

Could be I had wheelspin in 2nd,.. it was on 14" steeles with 175 tires on it so didn't have much grip.. don't know were the power band ends tho, haven't got it dynoed, but I will take your advice and go up a few hundred.

If got a question, do you have HASport motor mounts? Does your dash and door panel shake if you accelerate from 2500-3200 rpm??

Thanks!!

yes i have the hasports, and yes my dash/door panels shake... the whole car shakes alot because the mounts are pretty much solid. It also rattles alot at idle sometimes.

I suggest you get hasport axles if you havent already, im running OE teg axles and i keep shredding the carrier bearings.

 

[zammykoo]

very clean!

 

[JaPpEr]

yes i have the hasports, and yes my dash/door panels shake... the whole car shakes alot because the mounts are pretty much solid. It also rattles alot at idle sometimes.

I suggest you get hasport axles if you havent already, im running OE teg axles and i keep shredding the carrier bearings.

Jep I also got the HASport motor mounts. But it's nice to know it's kinda normal. There isn't much room for the engine to move also because of the intake sitting so close to de brake distributer and the firewall.

 

[Suanico]

nice, but it seems like you have an idling problem

 

[PhntmSk8r]

nice, but it seems like you have an idling problem

IACV or o2 sensor would be my guess.

Ive seen it alot in h22 swapped civics, mainly hatchbacks though because the wiring is different in the cx/dx hatchies, so it takes a little more wiring to get everything done properly.

 

[rey_boricua]

nice hatchie i also have an h22 ek

 

[PhntmSk8r]

nice hatchie i also have an h22 ek

that i still want to see! Since we only live 80 miles apart!

 

[infam0us3o5]

clean ride man, kinda like the round fogs. h22 =

 

[civicsi94]

nice ride. more pics lol