weird turbo?/
- Thread starter crazyek9
- Start date
someone that can fab a down pipe for you.......thats an xspower turbo. looks like my first pile of s**t. anyways.....you need stainless 321 steel, you have to have a flange machined for it. when i had minei looked for 2 years for someone that makes a dp or even just a flange for it......no one does.....so your stuck doing it the hard way.....and its going to run ya some bank doing it
ATPturbo.com
http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-FLS-033&Category_Code=ATP-FLS2
if you wana sell it, PM me with specs and price
http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-FLS-033&Category_Code=ATP-FLS2
if you wana sell it, PM me with specs and price
Last edited:
honestly wouldnt trust an ebay turbo, kinda of like a hit or miss kinda thing where you might get a good turbo or more than likely a bad turbo that wont last long, but im sure alot of different fabrication shops can fab you one no problem.
see that would prob work....but then again...its for a gt32.......not an xspower god know what turbine shell. dimensions between bolts (across)....would have to be identical
email ATP and ask for dimensions
thanks for ur help i dont know. how much is it worth??
yea thats what alot of people told me.. but i kinda dont trust it now even if it is brand new.. its from ebay.thanks
yea i was looking at n it is for a different turbo
yea i am thanks for all ur help
Genuine Rolla
Its PETEY PETE, y0!
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
If its brand new...whynot run it for a lil bit but don't put too much stress on it.
i just wanna push like 250 whp or something on a b18b.
that should do fine if runnin little boost. i say measure the bolt pattern (from bolt to bolt......180deg) and then ask atp if that flange would work....if it doesnt they could point u in the direction u need to go to get one
alright thanks
ok i will i think i know what that is does it look like some thread and a hole in the middle.. soory i cant explain it well..
yes, but the Function 7 Piece, is better
http://cgi.ebay.com/ebaymotors/Function7-T3-T4-4-AN-Turbo-Oil-Inlet-Flange-Gasket_W0QQcmdZViewItemQQcategoryZ33742QQihZ006QQitemZ160170493458QQrdZ1QQsspagenameZWDVWQQtcZphoto
need to measure the bolt spacing for the oil inlet, in the ad is says what that one is made for(1.5" i believe)
http://cgi.ebay.com/ebaymotors/Function7-T3-T4-4-AN-Turbo-Oil-Inlet-Flange-Gasket_W0QQcmdZViewItemQQcategoryZ33742QQihZ006QQitemZ160170493458QQrdZ1QQsspagenameZWDVWQQtcZphoto
need to measure the bolt spacing for the oil inlet, in the ad is says what that one is made for(1.5" i believe)
ok i get it thanks for ur help.. damn no one is flaming on me lol
why would we flame you?? soo you got an ebay turbo....no big deal, just tryin to help out.
i got a cheap ass turbo kit for cheapp so i just bought it and its kinda weird like a big ass waste gate this guy told me it was for a diesel turbo.. so i dotn really know iis there any manual or anything?? cause i have alot of diferent gasket n flange. i think its all turbo xs stuff
xspower.....dont feel bad i bought one to see how they were. i laughed when i got it....still have it too but when i bought it i was never looking to put it on any car what so ever. as of needing a manual for it.....yeah pretty much you have to know what your doing in turbocharging a honda motor....also you should do a compressor map just to make sure. i can help prob about the most on this topic, cuz i pretty much know some of the things that your kit came with.
ill type you up a "install manual" to the best i can including pics but be patient and give me a couple of days to do it also ill need you email addy (shoot it to me in pm) so i can send you a pdf file or files.....depending on how indepth you want a manual