Help with installing 4 point harness's.

[boosted to 26ps]

im prob sure about that.. thats if tho you use higher grade bolts. and if your floor where your bolting it too is also strong enough.

 

[oc_civic]

im prob sure about that.. thats if tho you use higher grade bolts. and if your floor where your bolting it too is also strong enough.

i think the fact that the autopower bar is accepted by MANY large scale racing bodies speaks greatly for its quality...

 

[boosted to 26ps]

yeah i does. like 3 years ago i was going for my nhra license. and i had to have my roll cage in my rex approved by a major official. which it was. went through the whole physical, cat scan/mri's, xrays on everything. got everything certified with the car and approved ( chassis, seat, restraint systems, fire suppression and so on). then the boy popped out. had to give it up. never did get my license/certification.....what ever they call it.

so in turn i guess if you do some research on bolt in cages/bars enough you should find some out there that are accepted.

 

[RHennin]

So how the hell do you correctly attach them to your car and not have a rollbar/cage/harness bar? I assume that most other attachment points are to far away or dont meet the min. angle requirements from the drivers shoulder.

 

[boosted to 26ps]

to the floor using sfi approved hardware

 

[AChase]

Well here are the pics i promised, let the hate mail arrive

 

[Destroy]

That looks god awful, dangerous, and very uncomfortable with the stock seats.

 

[oc_civic]

That looks god awful, dangerous, and very uncomfortable with the stock seats.

times 1 million... you should keep a body bag in your car in case you ever get in an accident..

 

[BlackHopeDC5]

times 1 million... you should keep a body bag in your car in case you ever get in an accident..

honestly though... take those seatbelts out

 

[RHennin]

my god, is that location acceptable according to scca and all the other HIGHLY suggested mounting locations? I doubt so. Def. doesnt appear to be safe.

 

[oc_civic]

my god, is that location acceptable according to scca and all the other HIGHLY suggested mounting locations? I doubt so. Def. doesnt appear to be safe.

mounting is actually correct...

angle is wrong
lack of bar is wrong
and quality (safety) of harness is questionable

 

[ryanM]

simple rule

you use 4pt harnesses with a roll bar.
dont have a roll bar? then you dont have 4pt harnesses.

 

[SleepingSol]

I had my 4pts mounted like that for a day, realized how much of a dumb ass i was for doing it I yanked them out the next day. Still waiting to go back in cause i havent decided if im getting a harness bar or having a cage put in.

 

[AChase]

Well, I have no idea why I took those god awful pics, I needed to get some up and those were the best I could get at that time, they are installed corretley to what I understand. I will take news pics asap. I have these installed the same way as this person in the tutorial.

http://www.my330i.com/mod12.php#L


I know it doesnt look the exact way in the pics but they suck ass and I apologize for taking such horrible pictures. So are they still installed wrong if done the way in the tutorial?

 

[AChase]

Well, I have no idea why I took those god awful pics, I needed to get some up and those were the best I could get at that time, they are installed corretley to what I understand. I will take news pics asap. I have these installed the same way as this person in the tutorial.

http://www.my330i.com/mod12.php#L


I know it doesnt look the exact way in the pics but they suck ass and I apologize for taking such horrible pictures. So are they still installed wrong if done the way in the tutorial?

 

[RHennin]

At the least I would suggest that you get a harness bar. Theres a guy that sells one for 120 on ebay, which is a great price. Its the same overall size as the sparco harness bar and from what I can tell is legit. I'm getting one sometime in the near future.

 

[oc_civic]

At the least I would suggest that you get a harness bar. Theres a guy that sells one for 120 on ebay, which is a great price. Its the same overall size as the sparco harness bar and from what I can tell is legit. I'm getting one sometime in the near future.

they are really not that safe imo...

 

[Destroy]

Well, I have no idea why I took those god awful pics, I needed to get some up and those were the best I could get at that time, they are installed corretley to what I understand. I will take news pics asap. I have these installed the same way as this person in the tutorial.

http://www.my330i.com/mod12.php#L


I know it doesnt look the exact way in the pics but they suck ass and I apologize for taking such horrible pictures. So are they still installed wrong if done the way in the tutorial?

Theres nothing wrong with those pictures. Seriously, get that ricey s**t out of there.