map sensor

[TiiM iiS l3eAsT]

alright im hooking up my 2.5bap map sensor....i hooked up the 3 wires but on the vacuum source do i connect it to my vacuum manifold....or to the original spot the map sensor went to?

 

[slowcivic E G]

alright im hooking up my 2.5bap map sensor....i hooked up the 3 wires but on the vacuum source do i connect it to my vacuum manifold....or to the original spot the map sensor went to?

either one, as long as its getting vacuum you're fine. But just to be safe I'd put it to its original place. As soon as you start the car you'll know if the vacuum source is sufficient or not.

 

[TiiM iiS l3eAsT]

yea i was going to ask if there was any way to check to make sure the map sensor is hooked up correctly.....when we hooked it up the connections on the wires they are so small its hard to tell if its on or not......

 

[civic92si]

i got an 3 bar map sensor and it was gay because it didnt read it at all..which it was brand new =(

 

[TiiM iiS l3eAsT]

why didnt it work??