FS: D16z6 Long Block, Tranny, Eg 2/3dr bumper

Status
Not open for further replies.

z6_ftw

pimp fo sho
5+ Year Member
UP for sell is my bros D16z6. He has decided to go b-series so no need for the d-series anymore. The D16z6 longblock has maybe a half a mile on it since the rebuild. We rebuilt the block with ACL bearings, NPR rings, OEM Headgasket, and ARP headstuds. Water pump and timing belt has less than 20K. Got the motor back together and it ran fine for a bit, went to go down the road, and the oil pressure hit rock bottom and heard a faint knock. It does have rod knock. Dont think it was ran long enough to have crank damage and we have another set of ACL main and rod bearings for it(BNIB). It just needs a oil pump and its good to go. Here's the list:

D16z6 Long Block:
NO HARNESS OR ECU
Complete head with Dizzy, I.M.,TB, ETC.
ARP Headstuds(installed 2 weeks ago)-SOLD
OEM head gasket(installed 2 weeks ago)-SOLD
NPR Rings(installed 2 weeks ago)
New Vtec Solenoid Gasket(installed 2 weeks ago)
No name 4-2-1 2piece header SOLD!!!!!!!!!!!!!!!!
Extra set of ACL bearings for main and rod
Block was honed about 2 weeks ago

Tranny:
S20 with no grinds with linkage-SOLD
Stock axles with good boots

$400 OBO takes everything here.

Also have a 92-95 civic 2/3dr front bumper cover. Flat black in color and has lower grill cut out. Good shape over all. $40 obo

y8 dizzy perfect condition $45

y8 automatic starter $35

ek driver side airbag gray in color $35

****Prices are not including shipping. I need a zipcode if you want a price on shipping. And I may part out, depending on interest.****









 

xxsenceo89x

aka superman
Registered VIP
5+ Year Member
10+ Year Member
head gasket and head studs to 10604?
 


Silver Bullet

6 spd = titis
Registered VIP
5+ Year Member
10+ Year Member
where r u located?
 


jordan00711

New Member
Registered VIP
5+ Year Member
interested in bumper..any clue how much it would cost to get it color matched??
 

baller7764

New Member
Registered VIP
5+ Year Member
Will any d-series oil pump work with this? If I was swapping this in from a different d-series engine would the only other thing I need be the ECU?
 

Morpherex

New Member
5+ Year Member
How much for the engine/trans shipped to 53090.

Also, does it come with the intake/tb?
 

ricedout

Survivin life
Registered VIP
5+ Year Member
how does the oil pressure just go down like that? what u guys f**k up with on the rebuild?
 

z6_ftw

pimp fo sho
5+ Year Member
well we didn't mess anything up there is a thing called an OIL PUMP that can go out with warning
 

z6_ftw

pimp fo sho
5+ Year Member
^^Way too much to ship a tranny and block right now. Looking at $500 or more just for shipping. Not worth it. The weight it what hurts cause it has to be shipped as frieght
 

z6_ftw

pimp fo sho
5+ Year Member
TTT, Tranny, headstuds, head gasket sold. It there is anything you want, let me know. I am parting this d series and I have a ton of stock d series parts.
 
Status
Not open for further replies.


Top