b18c 93 b16 ecu

[nissansil]

hi! okay i need some help.... I just bought a 96 civic h/b with a jdm type r motor in it (96-97 motor is my quess). i pulled the ecu and it has stamped on it a date from 1993 and had jdm b16 written on it by hand. is it a P02??? and does it run right with this ecu???? It seems to pull well to 8,000 and trail off quick hitting rev limit at 8500-8600. I guess the motor should hit rev limit and like 9000???

 

[93turbo16]

hi! okay i need some help.... I just bought a 96 civic h/b with a jdm type r motor in it (96-97 motor is my quess). i pulled the ecu and it has stamped on it a date from 1993 and had jdm b16 written on it by hand. is it a P02??? and does it run right with this ecu???? It seems to pull well to 8,000 and trail off quick hitting rev limit at 8500-8600. I guess the motor should hit rev limit and like 9000???

What is the ecu code on the side.

P30?

 

[nissansil]

A p02 was in the serial number but i don't think its right. i will check again tonite.

 

[nissansil]

its po6 it has 8500 rev limit. It also seems it has no power under 3000 rpm help!!!

 

[civic98turbo]

you got a P06 that was vtec converted and chipped

 

[nissansil]

it was a d16z6 ecu right?? it seems to run crazy rich in vtec! do i need to get a better ecu? if so what is the least expensive option to make it run right?

 

[guwakjai010]

it was a d16z6 ecu right?? it seems to run crazy rich in vtec! do i need to get a better ecu? if so what is the least expensive option to make it run right?

dont' need another ecu, u need another map

 

[nissansil]

ok from who??

 

[nissansil]

took it to phearable and chipped runs awesome! thanks for nothing club civic.