Thought I'd introduce myself ..............(picture heavy!!!!)

[patrickd_21]

Hey everyone...I decided to sign up to the forum tonight just cause i was bored lol...anyways, this is my ride and i hope you guys enjoy it

positive and negative comments welcome

There is a cage left to go in and my rear disc swap which is sitting at home lol

the car is a 97 civic hatch, D16y8, GT2860RS, Vitara pistons, Eagle rods, etc

put down 300whp @17psi...going for 350-375whp when it comes out next summer

best time on street tires @ 300whp is 12.8@118mph

All the work was done by me except for the manifold and IC piping fab

hope you guys enjoy

A couple more recent pics with my wilwood 12.2 inch BBK at the track

heres a detailed list of the setup:

Car:
97 civic hatchback
80 000km on body (NO RUST AT ALL)
~12 000km on engine

engine :
d16y8
Vitara pistons
Eagle rods
ARP 2000 rod bolts
oversized ACL race bearings
ARP head studs
re-machined and micro polished crank
OEM headgasket
OEM gasket kit
3-angle valve job on head
.04 PTW clearances
Energy suspension motormount inserts
resurfaced OEM flywheel
ACTION 2MS clutch
stock si tranny

turbo setup:
garret GT2860RS (Freshly JUST REBUILT)
Turbosmart BOV
Turbosmart 32mm wastegate
Turbosmart manual boost controler
B&M fuel pressure regulator
780cc Precision Turbo injectors
custom 2.5 inch Stainless intercooler piping
custom 3 inch stainless down pipe with 3 inch exhaust (no cat, 18 inch resonator, magnaflow XL turbo exhaust
K&N filter
atmospheric 10 inch dump tube
Yonaka motorsports intercooler (24x12x3 if i remember correctly lol)
HUGE aluminum rad lol
Audi S4 fan
Autometer ,echanical boost gauge
Autometer electrical oil pressure guage
Innovate LC-1 Wideband gauge
B&M fuel pressure guage
Tuned on CHROME by Richard from RD turbo productions
Made 300whp / 240wtq @ 17psi

other mods:

skunk2 Pro-C suspension
16inch Konig Countersteer wheels
Hankook RS-212 tires
full energy suspension polyurethane bushing kit
ASR subframe brace
ASR 24mm swaybar
BLOX lower control arms
2004 Porsche GT3 seats
CTR front and rear lip
badgeless grill
Alot of security stuff lol
Wilwood BBK (4 piston caliper, 12.2 inch slotted rotors)
Cobalt race pads
intergra rear disc conversion with Hawk HP+ pads
Personal steering wheel
NRG slim hub


Im probably forgeting alot of stuff.......

 

[2slo4u]

really nice
good look'n numbers as well

 

[Jbuck2KCivic]

Turbo SOHC FTW

 

[enycesam]

Looking good there.

 

[o3civic_si]

damn thats a hot ride

 

[hooked_on4]

Love that you track it, doesn't make sense to build a car n not do what you built it for.

Alwayz wanted to boost my ZC when I had it, nice ride man, what kind of suspension work have you done?

 

[R3dline]

way to save the sohc, f**king sweetness right there

 

[patrickd_21]

thanks for all the comments guys!

Love that you track it, doesn't make sense to build a car n not do what you built it for.

Alwayz wanted to boost my ZC when I had it, nice ride man, what kind of suspension work have you done?

i agree completely

heres a list of mods (ill add it to the original post too):

Car:
97 civic hatchback
80 000km on body (NO RUST AT ALL)
~12 000km on engine

engine :
d16y8
Vitara pistons
Eagle rods
ARP 2000 rod bolts
oversized ACL race bearings
ARP head studs
re-machined and micro polished crank
OEM headgasket
OEM gasket kit
3-angle valve job on head
.04 PTW clearances
Energy suspension motormount inserts
resurfaced OEM flywheel
ACTION 2MS clutch
stock si tranny

turbo setup:
garret GT2860RS (Freshly JUST REBUILT)
Turbosmart BOV
Turbosmart 32mm wastegate
Turbosmart manual boost controler
B&M fuel pressure regulator
780cc Precision Turbo injectors
custom 2.5 inch Stainless intercooler piping
custom 3 inch stainless down pipe with 3 inch exhaust (no cat, 18 inch resonator, magnaflow XL turbo exhaust
K&N filter
atmospheric 10 inch dump tube
Yonaka motorsports intercooler (24x12x3 if i remember correctly lol)
HUGE aluminum rad lol
Audi S4 fan
Autometer ,echanical boost gauge
Autometer electrical oil pressure guage
Innovate LC-1 Wideband gauge
B&M fuel pressure guage
Tuned on CHROME by Richard from RD turbo productions
Made 300whp / 240wtq @ 17psi

other mods:

skunk2 Pro-C suspension
16inch Konig Countersteer wheels
Hankook RS-212 tires
full energy suspension polyurethane bushing kit
ASR subframe brace
ASR 24mm swaybar
BLOX lower control arms
2004 Porsche GT3 seats
CTR front and rear lip
badgeless grill
Alot of security stuff lol
Wilwood BBK (4 piston caliper, 12.2 inch slotted rotors)
Cobalt race pads
intergra rear disc conversion with Hawk HP+ pads
Personal steering wheel
NRG slim hub


Im probably forgeting alot of stuff.......

 

[stupidguy10]

nice and clean.....lovin it....d-series all the way

 

[EK|B]

First thing to come out of my mouth after looking at the engine bay pic and back to the numbers: "Man that s**t is f**king fast!"

Your car would love you if you got it an SiR lip.

 

[ForestGreenCiv]

DAYUM! thats a phat whip yo. Very nicely done. I myself have a sohc z6. very strong motors

 

[Sammo115]

wow nice! where the heck did u come up to find some Porsche GT3 seats?!? last picture is dope! looks like it was taken from a game replay HAHAHA.

 

[thisisoriginal]

how much whp are you making? Im turboing my D ...collecting parts now


Turboed Ds are so sick

 

[hooked_on4]

how much whp are you making? Im turboing my D ...collecting parts now


Turboed Ds are so sick

Did you read anything before you posted that

 

[Genuine Rolla]

Looks great man...! The only thing that i'm not feeling is the front lip but, other than that

Glad to have you here..!!

 

[SiBlue_EK]

looks good.....300whp on rear drums, how is the braking on it...i would b scarred s**t less


good work though

 

[hooked_on4]

intergra rear disc conversion with Hawk HP+ pads

 

[ScratchNSniff]

Looks good...need to clean up the rear though...looks super dirty...

 

[rey_boricua]

welcome to the site nice setup on the SOHC

 

[patrickd_21]

Looks great man...! The only thing that i'm not feeling is the front lip but, other than that

Glad to have you here..!!

lol ive had that comment multiple times...the thing is that my bro has a mugen front lip on his car and at the time I bought the lip, i didnt think about the SIR lip...ill probably change it next summer