rear disc brakes
Si or LS gauge cluster
Si grill
Si lips
wheels
Tein S techs and tokiko illuminas
Si front sway bar with lower control arms
ASR subframe brace with 24mm swaybar
Clean the salt off
Clean the salt off
Clean the salt off
Ground Control Coilovers*
Tokico Illumina's
Viper Alarm*
Si Rear Sway Bar*
Omnipower LCA*
Tint
Fit Lip
Remove various dings/dents and hit a few panels with touchup paint
Full engine tune-up, oil change, filter, spark plugs/wires, timing belt, etc.
Should have all that done by the end of June!
*= Waiting to be installed as soon as the weather breaks
My upcoming plans include:
99-00 heater control swap
Rear Disc
Drill/slot rotors
Stainless lines
Camber Kit
New tires
find cheap rails for my Sparcos
and more for sure
Simple things, money is low right now gotta save up for the next ride
1. Get shocks
2. Lose the dark tint
3. Repaint window moldings
4. Replace passenger rear view mirror
Hopefully that's it
Password:JDM Shift Boot (complete)
Blox Gold 5spd Shift Knob (complete)
Door Speakers + Deck (complete)
NRG Racing Seats (in progress)
Harnesses for Racing Seats... (in progress)
1. Alarm w/ pager and flame thrower + camera outside
2. p28+tunning
3. Front balljoints
4. Install front camber kit
5. Dark Tints
6. 5zigen Proracer GN or Rota Attack
7. Tokico Illuminas and Ground Control Coilover or Skunk2 Pro-C
8. Eibach Sway abr kit f/r
9. Then buy some more HIDs (cause i got jacked)
7. Then build my spare y8 for boost.....
1. Buy '99-'00 hatch
2. Mugen front spoiler
3. CTR grille
4. PWJDM Fogs
5. HIDs
6. F2 Type One
7. Energy suspension polys
8. STBs
9. ACT 6 puck- sprung / HD pressure plate
10. P08 IM
11. 4-2-1 Exhaust manifold
12. SiR Gauge cluster
13. Do it all in 1 week after March 14th
My upcoming plans include:
99-00 heater control swap
Rear Disc
Drill/slot rotors
Stainless lines
Camber Kit
New tires
find cheap rails for my Sparcos
and more for sure