I'm trying to hook up a headunit and I'm looking for the wires for the speakers to wire them up and can't find what the wires in the harness??? Do they change colors from when the wires connect to the speakers to when the wires get to the back of the headunit or what. Any help would be appreciated ASAP I'm working on the car now and would like to finish it up. Oh and there is no harness it was cut off so everything has to be hard wired that's why I need to know this.
Audio Help ASAP!!!
- Thread starter kream88
- Start date
best thing to do is rewire it at that point, but best you could do is just trial and error, use a test light to find your 2 power wires and the ground and go from there. that or maybe theres some book or diagram out there to tell you i dont know.
I would but the factory harness was cut.Get an aftermarket conversion wiring harness...they're like 15 bucks at circuit city.....
connect original factory harness to conversion harness, conversion harness to headunit...
Is it aftermarket headunit?
http://www.installdr.com
This site wil tell you which colors on your stock harness corresponds to your aftermarket deck. Good luck with the install. Should be simple with this.
This site wil tell you which colors on your stock harness corresponds to your aftermarket deck. Good luck with the install. Should be simple with this.