Greddy Turbo Kit

[TiiM iiS l3eAsT]

good luck man...keep us updated and if you have any questions or problems feel free to PM me...

 

[AllTracCelica]

But any turbo i get for my D16 will IC piping fit just about any turbo put on? Like come to exact right spot?

 

[Esotericimage]

Found all this on website is it worth it?


Garrett T3/TO4E 57 trim Garrett T3/TO4E 57 trim
- A/R .63
- Turbine Housing 4 Bolt
$575.00

EG/EK ALUM CNC FMIC KIT EG/EK ALUM CNC FMIC KIT
- BOV flange Greddy
$250.00

Delphi 650CC Delphi 650CC
$285.00

SPoolin 27X6.5X3.5 intercooler SPoolin 27X6.5X3.5 intercooler
$190.00

Tial 38mm Wastegate Tial 38mm Wastegate
- Bar 0.5 (7.25psi)
$225.00

Blox 96-00 Honda Civic rear LCA (Blue) Blox 96-00 Honda Civic rear LCA (Blue)
$90.00

SpoolinPerformance Log Manifold Package deal (B and D series only) SpoolinPerformance Log Manifold Package deal (B and D series only)
- AC Compatible yes
- Downpipe 2.5
- Dumptube Open Atmosphere
- E-cutout Modification no
- Flange T3
- Motor Series D
- Options no
- SpoolinPerformance T-Shirt X-Large
- Tial Wastegate 38MM
- Turbine Housing 4 Bolt
$575.00

Blox 88-00 Honda Civic, 90+ Acura Integra Rear Camber Kit Blox 88-00 Honda Civic, 90+ Acura Integra Rear Camber Kit
$89.00

Blox 96-00 Honda Civic Front camber arms Blox 96-00 Honda Civic Front camber arms
$140.00

Walbro 255 LPH HP fuel pump GSS342 Walbro 255 LPH HP fuel pump GSS342
$95.00

Type-RS Type-RS
$90.00

T3/T04E Oil Feed/Return kit T3/T04E Oil Feed/Return kit
$120.00
Sub-Total: $2,724.00

OK, 1st off.. the downipe you posted is crap and on the wrong side.

Go-Autoworks has the best kits at a good price. Xenocron.com has injector/fuel pump combo's, BOV and wastegate should be a reputable company. Greddy and all that high dollar is nice, but not necessary. TurboXS makes decent stuff and easy on the wallet. Those 2 places have everything your looking for!

As for the ECU, you can get it socketed and chipped locally when the car goes for tuning. Check your local tuner to see what they use. I would be best to build it and tow it to the tuner or have the shop with the dyno install your kit and get a package deal.

Autoworks has feed and drain lines as well. i went locally and spent 108 on a -10 an drain line.. so its best to get it all from one place. Greg knows his s**t and will point you in the right direction.

Might want to look into a Vacuum block also(BLOX)

Xenocron and Go-Autoworks is all you need FTMFW!

 

[TiiM iiS l3eAsT]

But any turbo i get for my D16 will IC piping fit just about any turbo put on? Like come to exact right spot?

depends on the turbo....and how you clock it...

 

[AllTracCelica]

I have considered Go-Auto works heard a lot of good stuff about them. What power levels would i be looking at with this kit? I'm wanting to keep car daily driver but still pushing 250-300hp. So when want to have some fun i can. I have suspension and everything done now its time to got for power. Have emailed Greg seems like very knowledgeable guy. My question is now. The stock clutch would be fine with this setup for little while? it is brand new clutch put in when motor was rebuilt. Really good motor it will be running on so. Should i just get P28 ECU get it chipped and socketed and and just take it to tuner shop and they will tune it or do i need the software to do it? Chipped for crome neptune, hondata which one? or anyother good ones.

Thanks,
Dereck

 

[TiiM iiS l3eAsT]

I have considered Go-Auto works heard a lot of good stuff about them. What power levels would i be looking at with this kit? I'm wanting to keep car daily driver but still pushing 250-300hp. So when want to have some fun i can. I have suspension and everything done now its time to got for power. Have emailed Greg seems like very knowledgeable guy. My question is now. The stock clutch would be fine with this setup for little while? it is brand new clutch put in when motor was rebuilt. Really good motor it will be running on so. Should i just get P28 ECU get it chipped and socketed and and just take it to tuner shop and they will tune it or do i need the software to do it? Chipped for crome neptune, hondata which one? or anyother good ones.

Thanks,
Dereck

what size is the turbo your going with ??

stock clutch might be fine for a little bit....but your gonna need a new one after awhile..i would go with a stage 3 or 4 clutch....my stage 3 i bought is perfect for DD....

the tuner will have the software to tune it....

go to www.xenocron.com and buy a chipped ecu with a basemap....then bring all the s**t to the tuner and have them tune it....call and ask your tuner for more details...

 

[AllTracCelica]

Lol i have http://www.completeautorepair.net/ that can tune where i live but anywhere else in lubbock texas?

 

[AllTracCelica]

Well here it is i have setup with Go Autoworks

- GO-AUTOWORKS Stainless Log Manifold

- GO-AUTOWORKS SS 2.5" downpipe

- GO-AUTOWORKS dumptube

- Bullseye Power T3/T4 57 trim .55 A/R

- Tial 38mm silver wastegate

- Tial 50mm silver blow off valve

- complete oiling kit

- GO-AUTOWORKS Race charge pipe kit

- GO-AUTOWORKS bar & plate intercooler

- (6) high quality silicone reinforced couplers

- (12) stainless T bolt clamps

- P28 ECU Chipped With Crome Basemap

-OBD2-OBD1 conversion harness

-Precision Injectors w/ clips

-Walbro 255 pump

For total of 3,039 shipped for setup?

Does that sound like a good deal going to buy it tomorrow if it is not someone let me know dont want to get over charged....

 

[AllTracCelica]

Also complete auto repair wants 150$ an hour tuning?????? Sounds out ragious to me?

 

[TiiM iiS l3eAsT]

ouch 3000 shipped is quite a bit...but its quality parts so you man as well buy it.....

150 an hr for tuning seems like quite a bit....but it will be worth it trust me....call around and see if there is any cheaper places to tune ??