rebuild turbo?
- Thread starter civic92si
- Start date
rebuilt as in? just the seals or are you taking it apart? if its apart then you need to have a shop to do that since the blade needs to be rebalanced . search on like homeadeturbo.com on replacing the seals if that what you looking for.
edit and thers not a whole lot of shops that will balance the blades
edit and thers not a whole lot of shops that will balance the blades
dang i cant take off the other bearing from the hot side...fawk! =( its off the turbonetic,....but wateva...im getting my T3 T04E 0.50 PRECISION GARRETT!
im fed up with use turbo!
Max. Rated HP 450 Horsepower
Part No. - SC-5031E
Compressor Wheel Diameter 54mm
Compressor Wheel Inducer - 2.123
Compressor Wheel Exducer 3.000
Wheel Trim 50 Trim
Compressor Cover Inlet 3
Outlet Size 2
Bearing System PTE Race 360 Center Section
Turbine Housing A/R Ratio - .48 or .63 5 Bolt Turbine Housing
Turbine Wheel Style - T31 (Stage III)
Turbine Wheel Inducer 2.559"
Turbine Wheel Exducer 2.229"
Turbine Wheel Trim - 76
im fed up with use turbo!
Max. Rated HP 450 Horsepower
Part No. - SC-5031E
Compressor Wheel Diameter 54mm
Compressor Wheel Inducer - 2.123
Compressor Wheel Exducer 3.000
Wheel Trim 50 Trim
Compressor Cover Inlet 3
Outlet Size 2
Bearing System PTE Race 360 Center Section
Turbine Housing A/R Ratio - .48 or .63 5 Bolt Turbine Housing
Turbine Wheel Style - T31 (Stage III)
Turbine Wheel Inducer 2.559"
Turbine Wheel Exducer 2.229"
Turbine Wheel Trim - 76