turbo clamps!!

[civic92si]

wheres the best place/cheapest place to get turbo clamp!? i think its call the T clamp?

 

[NFR_AP2]

id try ebay, y0

 

[2slo4u]

ebay should sell them..but just because you get T bolt clamps doesnt mean it'll hold better than regular ones cause if you tighten them to much on an aluminum piping you'll just end up bending the piping, so make sure you have like...steel or mild steel piping as well

 

[TiiM iiS l3eAsT]

ebay should sell them..but just because you get T bolt clamps doesnt mean it'll hold better than regular ones cause if you tighten them to much on an aluminum piping you'll just end up bending the piping, so make sure you have like...steel or mild steel piping as well

nah your wrong....

i had regular worm gear clamps and they kept blowing off @ 15psi.....everytime i hit full boost it would blow off....

i upgraded to t bolt clamps and it hasnt came off since....t bolt clamps really do make a difference....

yes they crush the pipe if you over tighten them.....but if you tighten them to spec you should have no probs...

torque spec for them is 75 in lbs....

this is where i ordered my t bolt clamps from.....PM a guy named Road Pirate....he has a company that sells excellent t bolt clamps and couplers....

http://www.talkjdm.com/member.php?u=8

 

[NFR_AP2]

nah your wrong....

i had regular worm gear clamps and they kept blowing off @ 15psi.....everytime i hit full boost it wont blow off....

i upgraded to t bolt clamps and it hasnt came off since....t bolt clamps really do make a difference....

yes they crush the pipe if you over tighten them.....but if you tighten them to spec you should have no probs...

torque spec for them is 75 in lbs....

this is where i ordered my t bolt clamps from.....PM a guy named Road Pirate....he has a company that sells excellent t bolt clamps and couplers....

http://www.talkjdm.com/member.php?u=8

his name is highway-star on clubcivic

 

[Bheims]

You can also try go-autoworks.com they do good work over there

 

[swamp-chode]

Napa Auto parts normally stocks them, well at least here in Louisiana we do .

 

[swamp-chode]

oh, what size do you need? I can give you a part number

 

[2slo4u]

pushing 1.5 bar on my set up with aluminum piping right now with no problem with regular ones so....im pretty sure the clamps are just preference

 

[civic92si]

2.5 and 2.0 these are my pipe size.

 

[rey_boricua]

highway star send him a pm

here is his ebay store

http://myworld.ebay.ca/votionspeed/

 

[civic92si]

k thanks!! this is off topic but how long does it take oil to burn off also if i have 2.5 inch piping what size silicon hose do i need? 2.75? or 2.5?

 

[Pootie]

ONE STOP SHOP!! thank me later,, fast shipping too!!
(Pootie approved)

http://siliconeintakes.com/

http://www.siliconeintakes.com/product_info.php?cPath=1&products_id=102&osCsid=d09fb62082c70376b2f554d11c95dcf4

http://www.siliconeintakes.com/product_info.php?cPath=6&products_id=4&osCsid=d09fb62082c70376b2f554d11c95dcf4

http://www.siliconeintakes.com/product_info.php?cPath=3&products_id=33&osCsid=d09fb62082c70376b2f554d11c95dcf4

http://www.siliconeintakes.com/product_info.php?cPath=7&products_id=201&osCsid=d09fb62082c70376b2f554d11c95dcf4

http://www.siliconeintakes.com/index.php?cPath=17&osCsid=d09fb62082c70376b2f554d11c95dcf4

 

[Pootie]

k thanks!! this is off topic but how long does it take oil to burn off also if i have 2.5 inch piping what size silicon hose do i need? 2.75? or 2.5?

well the coupler are sized by interior radious. So it's tru to spec.

2.5 for 2.5

and so on!

 

[civic92si]

thank you pottie those are very cheap! thanks~!!!