4 gauge power cable through firewll.

[LittleTicoy]

Hey Civic Nation, I want to run a 4 gauge power wire through my firewall. I'm wondering where would I find the best area to run the w
ire through without problems. Thanks guys!

 

[LittleTicoy]

Anyone out there that can bring light to my question please. Thanks.

 

[chadi]

you could drill a hole where you please...

look in the engine bay...you can see some rubber caps covering holes that are not being used..you can run it through there.

 

[TiiM iiS l3eAsT]

you could drill a hole where you please...

look in the engine bay...you can see some rubber caps covering holes that are not being used..you can run it through there.

 

[Bheims]

you could drill a hole where you please...

look in the engine bay...you can see some rubber caps covering holes that are not being used..you can run it through there.

or run it under the hose that drains water from a/c

 

[Brian13]

I see you have an 7th gen...This might be the easiest spot. From the interior, take the glove box off. In the engine bay, you see a grommit* on the passenger side. (Might be easier to locate with the wheel off) but If you feed the cable through there it will come out behind the glove box. Then run the cable where ever.. When I had a system that's how I ran mine.

 

[LittleTicoy]

I see you have an 7th gen...This might be the easiest spot. From the interior, take the glove box off. In the engine bay, you see a grommit* on the passenger side. (Might be easier to locate with the wheel off) but If you feed the cable through there it will come out behind the glove box. Then run the cable where ever.. When I had a system that's how I ran mine.

Thanks Brian, I'll check it out this weekend. And thank you to the others for the suggestions!