93 EH9 hmt setup

speedjunky01

New Member
5+ Year Member
id like to start of by saing SUCK IT if you dont like the car

its ghetto rigged and runs mint

usual CDM garbage, 11 psi stock 240,000 mile motor











 

Kensai

♪♫♪♫♪~
Registered VIP
Registered OG
5+ Year Member
Whoa. Take it easy with the heatwrap! Numbers!?
 


speedjunky01

New Member
5+ Year Member
14.8@94 with an amazing 2.4 60 :D and running on the basemap along with a pre turbo leak w00t

dyno tuning tuesday once i fix up the cold side pipes a bit
 

Kensai

♪♫♪♫♪~
Registered VIP
Registered OG
5+ Year Member
What turbo is it? And what the hell is that black box next to the water overflow?
 


speedjunky01

New Member
5+ Year Member
ebay .50/.63

its the bottom of the stock box recycled into a turbo intake using some drier venting
 

speedjunky01

New Member
5+ Year Member
looks clean but I wouldn't beat on that motor
going from 11 to 15 psi next week

seeing revlimiter and 4th gear pulls for 6,000 miles now, even a couple of 5th gear high load pulls lol, no issues at all, doesnt burn oil(the return drips a little) compression is rock solid at 170ish across all 4 after 240,000 miles and 6,000 boosted at 11psi out of a ebay t3/t4 .50/.63
 

speedjunky01

New Member
5+ Year Member
needed MOAR intercooler got it for 50 shipped, looks MUCH better then the other ebay pice, thing is built like a TANK, doesnt feel like an aluminum feather like the last one, inside looks much better and the fins are nice and stiff they dont seem to bend in the freaking wind of from a bug lol.



should help keep the charge cool at 15psi next week :D

picks of bumper carnage tomorrow lulz
 

TheExtra

New Member
5+ Year Member
lucky you with that rock solid engine with that milage. I would like to see many more pics of that Vehicle. =D
 

civhatch92

That's my honda.
Registered VIP
Registered OG
5+ Year Member
"its ghetto rigged and runs mint"

hopefully it lasts..being ghetto rigged and all... especially with that many miles.

clean sleeper status :thumbs up
 

DX raceR

New Member
Registered VIP
5+ Year Member
10+ Year Member
this thing is cool.. i dig it... amazing with that many miles.. good luck cuz.
 

speedjunky01

New Member
5+ Year Member
well after the new FMIC i need to redo the charge pipes i went to the local pick n pull and snaged a new air box for a new intake design ive been thinking about

LMK what you think, will have a hole in the bumper where it sits and have a BPI velocity stack to go on the end of the pipe, will put a bit of window mesh or something over it too keep large debris out and the filter inside the tock airbox will do the rest

anyone have any ideas how it would perform in the rain? Im not sure LMK your thoughts on this as well





JB weld FTW!!!!
 


Top