what are you smokin? i'm pretty sure a built and boosted d16 can make more than 250hp. 400whp on pump gas is not even far fetchedYour car looks good so far...I love the color, what color blue is it ???
250 HP ??? That's going to be hard to acheive, with the stock motor, even fully built turbo...I'd swap it for a dual cam LS/Vtec or B20Vtec, and turbo it, and you could easly hit your 250 HP mark...or if you're a baller, go with a k20 set up...K20A, I/H/E, K-Pro = 220 WHP alone...Which either way you decide to go, goodluck on your build...
its a midnight blue and how much would a LS/Vtec swap would be?.....that the GSR motor correct?Your car looks good so far...I love the color, what color blue is it ???
250 HP ??? That's going to be hard to acheive, with the stock motor, even fully built turbo...I'd swap it for a dual cam LS/Vtec or B20Vtec, and turbo it, and you could easly hit your 250 HP mark...or if you're a baller, go with a k20 set up...K20A, I/H/E, K-Pro = 220 WHP alone...Which either way you decide to go, goodluck on your build...
its a midnight blue and how much would a LS/Vtec swap would be?.....that the GSR motor correct?
I am not going to get into a pissing contest, with you over some BS...I know a 250 hp D-series in acheiveable...But look at the GAY torque numbers that he will have...I was just saying that it would be way easier to acheive his 250 hp, with a B-series turbo, and he'd have higher torque numbers...what are you smokin? i'm pretty sure a built and boosted d16 can make more than 250hp. 400whp on pump gas is not even far fetched
anyways, moving this to members rides
Not to bad at all for the price. Welcome to CC
I am not going to get into a pissing contest, with you over some BS...I know a 250 hp D-series in acheiveable...But look at the GAY torque numbers that he will have...I was just saying that it would be way easier to acheive his 250 hp, with a B-series turbo, and he'd have higher torque numbers...
A friend of mine built a Turbo LS (B18B) swapped 98 coupe...with a stock bottom end, and about 7, or 8 lbs. of boost and put down 250 hp and almost 200 lbs of TQ...
But that's just my ...Like I said which ever way you decide...good luck with eveything...
on the contrary if he were to build the d with the money he'd spend on JUST doing a b swap hed have way more power and alot more torque. d series produce more torque when compared to the b series. stick with the y8 and turbo it. Dont know the exact name of the pistons but theres a suzuki suv that has low compression pistons with the same bore as the d series (75 mm). use them and you could easily throw 25+ lbs of boost at that motor safelty if you build it right. 7.8:1 compressoin ratio
yea im trying to get some GSR FAT 5's and lower it like 1in or 1.5in if anybody has some GSR fat 5's let me knowLowering it and smaller wheels will make it look a lot better.