Fenders are all cut for the sidemarkers, pretty much the entire passenger side is ready for paint, planning on shooting out the removable parts soon, (door handle, mirrors, door mouldings, lip etc.) ebp looks soo good in the container! love it!
My Craigslist Gem. EBP EM1
- Thread starter 98civb18c
- Start date
Nice man, glad to see there's progress! Post a pic of EBP in the container 
very nice find. I saw on craigslist not too long ago a guy wanting to trade a ebp em1 for a eg hatch with a swap. I have an eg hatch with a 00si in it and almost straight out traded him for it. only thing was his needed a timing belt and more miles, mine had all major fixes done like waterpump, timing belt, head gasket, valve cover gasket and only 75K miles. Man I wish I would've traded him. yeah his needed some work but man, it's an em1 we're talking about. still kicking myself in the ass for passing that up. probably could've talked him into swapping shells. that was the only thing holding me back was my motor was in better shape.
keep us posted with your updates. looks like a great project
keep us posted with your updates. looks like a great project
JDMDRIVEREK
New Member
I Love that Built not Bought sticker...!
LMAO...so many people do the opposite...
JDMDRIVEREK
New Member
Yeah bruh...let me get one of those sticker's....
Look's like the em1 coming along.....
PM me if you can do that for me...Thanks..
Look's like the em1 coming along.....
PM me if you can do that for me...Thanks..
Thanks, just picked it up, its an 04 F5 Sno Pro. Clutched, canned, jetted.. Thing rips ass, put 150 miles on it in the last 3 days!
I can cut the decal for you, shipped for like 6 bucks if that works?
The EM1 will be done soon I hope, I hate driving around my lifted 98 V8 dodge ram. I get 8 mpg with the sled in the back..
I can cut the decal for you, shipped for like 6 bucks if that works?
The EM1 will be done soon I hope, I hate driving around my lifted 98 V8 dodge ram. I get 8 mpg with the sled in the back..
JDMDRIVEREK
New Member
Sure that's no problem...
as far as the Lifted V8 that seem's to be a big problem lol, gas guzzler!.
Get the EM1 ready I wanna see the finished job when complete...!
Appreciate it..PM me with all the info you will need. & what I need to do. i don't have a Pay Pal but my sis in-law does...i'll be using her's....
I run 35's in the summer, but in the winter I have 33's on the OEM chrome sport wheels.
Cool. I'll get at you when I get out of class! I cant wait for the EM1 to be finished either!JDMDRIVEREK said:
JDMDRIVEREK
New Member
K sweet.....
still seems low ... even with a lot of warm up time you should be in the 11s .... i would definitley look into a regear ... factory that thing probably has 3.73 or 4.10. Not sure on older dodges but on 07ish 1500's supposedly the biggest regear avail is 4.54 ... theres a guy on pirate4x4 running them with 40s and claims 15mpg empty but thats without a speedo correction, i bet they would do wonders for your truck especially since you only run 35s
i still stand by my statement not to turn this into a truck thread haha .... but id look into it thats all .... another guy i know used to have a 95 1500 4x4 single cab 5spd with the 318 and on 32s it pulled 13 hwy with the cel on, no regear
Heres an update on how shes doing. Got pretty much all of the body work done on the passenger side, its all ready for primer. Started on the drivers side tonight after I stripped all the stuff off the car. Have a ton of hand sanding to do and alot of masking to do. Started to pull that huge dent in my drivers side rear pillar. The drivers side door is pretty rough with rust. Found 2 holes in it underneath everything. One is in the front of the door where it was all bubbled, and the other hole is on the bottom at the end by the quarter panel. Holes are about dime size, going to blast it, sand it and weld some tin in there to fill the hole, then scuff it down and bodywork it so its nice and clean. Never be able to tell there was a hole there after its painted! The roof is the next project after the rust in the door... They f**ked that up. Also started plugging away at the EG. Here are the pics!
^ Ya thats chipped bondo, almost a 1/2 inch of it.
^ Ya thats chipped bondo, almost a 1/2 inch of it.
