93 EH9 hmt setup

[speedjunky01]

sorry for the lack of updates but been crazy busy with school, work, hoe's you know how it is.

got the dp fitted after a million pic cuts, its tacked together but need to buy 3 spools of fluxcore to get it welded up LMAO no pics didnt have time to take it off and take a few.

picked up some GSR leathers like them a lot comfy as f**k and give the cheap ass interior a welcome upgrade. the foam in the drivers seat was worn down and I had metal stabbing me in the kidney when driving it.

i got a set of rears too but fitments is deff an issue haha.

the brackets are different also the portion of the seat that used to go around the seats doesnt fit.
anyone know of a way to make integra coupe rear seats fit a 4dr civic?

 

[mymmeryloss]

u need better pics..

congrats on the leathers...

personally i hate leather seats. nothing like sliding out of ur seat around a corner and freezing ur ass off on a cold winter day and burning urself on a hot day...

 

[speedjunky01]

yeah its dark as f**k in my garage and thats the bet the iphone can do haha.

i hear you on the downsides of leather but I got them for a good price so why not? my seatbelt keeps me firmly planted in the seat BTW

plus they look baller

 

[speedjunky01]

back from the dead did some work on the interior

picked up a can of this s**t from autozone, turned out pretty good to me

the end result

just mask it really carefully, do a good 2-3 coats took me 2 cans all 4 doors

having my mom do the rear seats in leather for full out baller interior

 

[speedjunky01]

BALLIN

straight up gangsta

time to go do some burnouts to celebrate

 

[speedjunky01]

MOAR updates

;D

crammed on another intercooler condum this time off a coupe(yes i know swap the fenders/hood.corners so it fits right) well im a cheap f**k so i just crammed it on even managed to keep the grill somewhat lol.

the bumper sat in the sun and was all twisted up, hope its suny tomorrow and it rights its self, i tried to heat it with a torch but no go

then i got bored and added some speed holes!

cant even see them unless you know to look for them, they are down super low below the rear bumper so yeah it does remove some of the parachute effect, used an old cutoff wheel as a template for the holes, calibrated eye ball did the rest :yes:

H I DEEZ son with some more CDM headlights SOOOO MUCH clearer then the 18 year old stockers!!! i plan on resporing thestockers and painting the inside black eventually.

moar to come tomorrow

 

[speedjunky01]

repin harber freight son!! im doing the DP in two sections so if/when i bottom out its easier to fix an will be easier to take on/off

anti-lag will take any bits of slag/flux right off hahah

i got to work on the waistgate dump tube and though what would rHMT do??

yes or no? someone please talk me out of doing this because im about to lol

 

[NightCatEJ8]

Hmt Sohc-t Ftmfw!!!

 

[NIKE H34D]

LMAO I never seen this thread, super ghetto but fun to keep up on, nice build.

 

[speedjunky01]

LMAO I never seen this thread, super ghetto but fun to keep up on, nice build.

your moms ass was super ghetto once i was done too

all joking aside I take that as a compliment

swaped axle out in 20 min today, did an oil change, and finished half ass welding the temp-DP droped it on the ground and called it a day

now just ned to tidy up some details
-adjust the HID's the right one is shooting at helicopters
-wire in the high beams
-paint the drivers door panel
-tint the rear
-bring it to a shop to put on the 3" exhaust right this time

should get most of that done tomorrow

 

[speedjunky01]

:o

now to call the folks over at delta cam for a regrind . . . im thinking 272 or bigger

 

[Aaron.]

about time you did something to the motor lol but anyways did you ever get it dynoed?

 

[Robin...]

about time you did something to the motor lol but anyways did you ever get it dynoed?

 

[speedjunky01]

this is all going into the jdm d15b in the basment, no dyno just a street tune afr's at 11.8 and pulling 1.15/psi off stock maps in ectune thats pretty much the extent of the tune LOL it sucks in low cam but once it transitions over its much better

talking to delta about a 272 low cam 282 high cam should be a blast haha

also got some more traction today anyone know what these are worth im not into the JDM wheels

24.5" slicks