dohc zc to d series tranny

[millano99]

just a quick question will the DOHC zc bolt up to my d series tranny

 

[jlicrx]

just a quick question will the DOHC zc bolt up to my d series tranny

yes, the transmission will bolt right up if you have a JDM DOHC ZC

 

[millano99]

thanks man i appreciate the help

 

[millano99]

one last question will my wiring harness fit this motor mine is a d16z6 just new to hondas

 

[got traction]

yes, but the zc is obo0, so you'll have to convert the dizzy

 

[jlicrx]

one last question will my wiring harness fit this motor mine is a d16z6 just new to hondas

if you have the OBD1 DOHC ZC, the engine harness on the D16Z6 will be just plug and play - you will have connectors on the harness for VTEC that aren't used - you will need a different ECU than the P28

if you are trying to use the OBD0 DOHC ZC, the harness will still work, but you need to get the OBD1 DOHC ZC TD43U distributor and you will have some additional wiring changes for the cooling fan switch and the MAP sensor - you would need to use the injectors from the Z6 - you would also need to swap the driver's side engine mount from the Z6 onto the ZC - you would need different ECU

 

[bizoneoeh]

I used a obd0 dizzy but I had to cut some of the bolt tabs so it could fit. I never had a problem tho.

 

[Chris.]

I used a obd0 dizzy but I had to cut some of the bolt tabs so it could fit. I never had a problem tho.

you also put it in an OBD0 car right?

since he already is starting with an OBD1 car.. then as long as he had the OBD1 ZC... he should be fine. it will plug n play.

sorry... just wanted to clear that up