Turbo Rotary Mazda Minitruck Build
- Thread starter mymmeryloss
- Start date
Nice updates since I last checked, awesome!
Mr. Jollypants
Mr. f**king Jollypants
Registered VIP
Registered OG
5+ Year Member
10+ Year Member
15+ Year Member
I'll give you a klondike bar if you do some updates! 
tomorrow good sir...I'll give you a klondike bar if you do some updates!
names chris. ill try and get some old civic pics up if ur interested...
lemme do some diggin..
thanks man. hopefully get some picture updates tomorrow..
i gotta find em.. most of my pics were before digital cameras so i might have to scan some er whatever..
give me time brotha...
give me time brotha...
ok.you said if i was interested you'd post some pics of the Civic
98 civic dx. tangeria orange HOK. 15 inch gunmetal powdercoated spoon sw388's with spoon lugs(back when it was hard to get spoons in 4 lug in the states)
mugen knockoff lip, 99-00 conversion, ctr headlights sidemarkers and the list goes on and on... car eventually had full cf front end and a lot of haters...
92 si b20 frankenstein. 13.2 quarter all motor at Bandimere.
car was rough exterior but ran like a champ. man i miss that car..
92 cx jdm d15b. later turboed with a chincy ass setup, but it ran well minus some tps problems...
slammed to its nuts. no interior. spoons and millions of other wheels and tire combos..
93 vx. i let my ex have this car. stock engine. blades, mesh wheels, spoons....
full gsr seats front and back.. car was gorgeous..
ill have to get pictures scanned or something of the others..
92 cx. r33 front bumper buddy club sides and rear. air struts custom interior 17" tenzo shu 4's. i/h/e.
spoon hood
91 civic dx b16a swap. jdm front and lip. racing harts. primer with s2000 blue flames...
car was a lot of fun..
and now i have a stock 2000 civic lx. once the mini truck is done, watch out...
ok, well updates kind of i guess...
well i worked on actually getting the engine mounted this weekend so i can get wiring ran and start this thing up so i can see if i have any problems.
i got a cherry picker and f**ked around trying to get it in for like 5 hours by myself yesterday with no avail. i have a few clearnace issues and had to cut some metal out to make it fit and now i have it within a few millimeters of mounting up.
when i put this thing in for good after i get everything mocked up im going to either have to pull the cab and mount the engine then put the cab back on or get the engine in and paint the bay around the engine... havent decidied yet, but im getting restless on this thing sitting in the garage..
so after getting pretty pissed off yesterday i pulled out the sandpaper and went to polishing up the tubo and some other metal on the engine.. then i cleaned my garage up..
kind of shitty updates, but imma try to get out in the garage again today...
pics maybe tonight also...
well i worked on actually getting the engine mounted this weekend so i can get wiring ran and start this thing up so i can see if i have any problems.
i got a cherry picker and f**ked around trying to get it in for like 5 hours by myself yesterday with no avail. i have a few clearnace issues and had to cut some metal out to make it fit and now i have it within a few millimeters of mounting up.
when i put this thing in for good after i get everything mocked up im going to either have to pull the cab and mount the engine then put the cab back on or get the engine in and paint the bay around the engine... havent decidied yet, but im getting restless on this thing sitting in the garage..
so after getting pretty pissed off yesterday i pulled out the sandpaper and went to polishing up the tubo and some other metal on the engine.. then i cleaned my garage up..
kind of shitty updates, but imma try to get out in the garage again today...
pics maybe tonight also...
ive had a lot of vehicles period..