wiper help please!

[bmac9269]

so it was raining today in lovlely minnesota and i tried to have my wipers on the INT setting however nothing happens when i switch it to that, II and III work fine on the spin wand but i have no idea what the deal is please help! thanks

 

[bmac9269]

bump for crazy fast wipers in a drizzle

 

[RonJ]

Check whether hood fuse 43 or dash fuse 25 or 26 is blown.

 

[bmac9269]

y would it be a fuse when the other 2 setting work? just curious

 

[RonJ]

y would it be a fuse when the other 2 setting work? just curious

The three fuses are for the integrated control unit, which controls the intermittent function. However, fuse 26 is also needed for the other two wiper speeds, so you can scratch it from the list as you mentioned.

If the other two fuses are fine, check the INT setting of the switch:

 

[projektej8]

youre slipping up ron... lol
I would pull the connector off the switch first and make sure a pin didnt come loose. If everything looks to be in order troubleshoot with the above testing proceedure. I believe youre going down to the Honda dealer for a switch

 

[bmac9269]

is it hard to get to the switch?

 

[RonJ]

Did you look at the diagram? It shows how easy it is to remove the switch.

 

[redexcoupe]

No check your dom light fuse under the hood. strangely i had the same problem and that fuse was blown! and now i replaced it, and it works!

 

[RonJ]

No check your dom light fuse under the hood. strangely i had the same problem and that fuse was blown! and now i replaced it, and it works!

This is fuse 43, as mentioned in post #3 of this thread.

 

[redexcoupe]

Oh sorry about that RonJ my bad

 

[RonJ]

Oh sorry about that RonJ my bad

No sorry necessary. You are just trying to help.

 

[deschlong]

Depending on the outcome of your troubleshooting, this DIY might be helpful. http://www.honda-tech.com/showthread.php?p=37868978

Don't buy new when a fix will do.