omni or blackworks map?

[EG-HATCHIE]

which one do you guys run? and which one is better and why? im not worried about it costing 90 bucks thats chump change to me, i want plug and play no ghetto rig



blackworks 4 bar

http://cgi.ebay.com/ebaymotors/HONDA-CIVIC-Map-Sensor-4-BAR-All-Models-88-00-NEW-_W0QQcmdZViewItemQQhashZitem4150a93db2QQitemZ280526142898QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

or omni 2.5 bar?


http://cgi.ebay.com/ebaymotors/OMNI-POWER-2-5-BAR-MAP-SENSOR-HONDA-CIVIC-ACURA-INTEGRA-_W0QQcmdZViewItemQQhashZitem5d29b2dc2aQQitemZ400131546154QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories




thanks in advance

 

[Shiznit]

friend uses the omni 2.5bar. no problems that im aware of

 

[2NRSTV]

Well... if you're running over 2.5 bar, go with the Blackworks... If you're running under 2.5 bar, go with the 2.5 bar. I mean, you should know your boost needs better than any of us. In your garage, it says you run 14psi on high boost which is well below 2.5 bar. 1 bar is about 1 atmosphere which is about 14psi.

If $90 is chump change, then just go through Omni Power USA and get the 4 bar. It's only like $40 more.

 

[EG-HATCHIE]

friend uses the omni 2.5bar. no problems that im aware of

thanks man, i do know my boost needs just asking if anyone has had any problems with either of them, i bought a shitty 2.5 motorolla one on ebay for 28 bucks and cut my map wires up and the car runs like s**t with it. take it off to stock runs perfect again... thats why i asked

 

[Autoworks]

thanks man, i do know my boost needs just asking if anyone has had any problems with either of them, i bought a shitty 2.5 motorolla one on ebay for 28 bucks and cut my map wires up and the car runs like s**t with it. take it off to stock runs perfect again... thats why i asked

Are you changing the map sensor settings in the software? If not, it doesn't matter what sensor you run (other than stock) it would run like crap.

 

[2NRSTV]

^x2

Get the Omni Power Map. Never had any problems with them and they're plug&play.

 

[EG-HATCHIE]

Are you changing the map sensor settings in the software? If not, it doesn't matter what sensor you run (other than stock) it would run like crap.

ok so your saying until i get the ecu tuned a 2.5bar map sensor wont help me? or can i just change the settings in the ecu myself before i go get tuned?? i want to be able to step on it WOT so i can see if this custom wastegate arm (internal) i made is working right

thanks