been a memeber of the sit for a few mouths finly got pic up-94 hoda civic ex coupe

[civicmand16y7]

]this is my 94 civic ex coupe let me know what you think

MOTOR:
its a mini me swap y7 bolck with a y8 vtec head
skunk 2 intake
short ram intake
skunk 2 timing/cam gear
4-1 header
light weight flywheel

THE OUTSIDE
the color is black
i HAD a buddy club 2 4 pice bodykit(back to stock)
HAD alumunim wing took it off
also have a SS carbon fiber hood
oem head lights and oem tail lights
have after market corner light/leanse that lookes wicked at night

THE HANDLING
i just have coilovers on it for now

THE INSIDE
short throw shifter and the carpet has been tooken out
and some interior peaces painted red

 

[95coupeWI]

Looks a s**t load better man. Im diggin it. Maybe some tint? Whats your plans?

 

[civicmand16y7]

Looks a s**t load better man. Im diggin it. Maybe some tint? Whats your plans?

well i havent thought about tint but that is an idea...lol i was thinking about pulling the mini me motor out and drop a y5. dont worry it wouldnt be in long. long enogh to frashin up/ bulid the mini motor to hould spray. then if that dont hould up i was planing on do a lsvtec sawp. i can trade my y5 for a b18.but im really not sure about doing a swap right yet. but i do have plans on puting some control arms sway bars strut bracs ect. on. i would also like to put so jdm fog light on it as well. and thats bout it for the outside. planing on add a few gagues oil presser water temp. thaks for the postive feed back. it also looked really good with the bodykit it flowed real good with the car. i just thouth it was time to go back to stock seance the bodykit sean wasnt in anymore

 

[evilrilla2]

Outside looks clean, i like all your modifications. only negative thing i could see is your engine bay has some rusty parts. rusty as hell, some parts need to be replaced, or even spray painted. but nobody really looks under the hood, i just like keeping my bay as clean as possible.

 

[FAC3L3SS]

As clean as it is now, I say find an OE hood and recoup the money by selling that one. CF or not, it's design doesn't flow.

 

[evilrilla2]

i think the hood flows well with the bumper. if he was to replace the hood, he has to replace the front bumper as well.

 

[civicmand16y7]

As clean as it is now, I say find an OE hood and recoup the money by selling that one. CF or not, it's design doesn't flow.

i do have a oe hood with a mod. scoop. i just can give up the carbon fiber hood like i did the bodykit. it cost way to much and i like it. lol NOTE i have stock bumpers on not the body kit. as for the rust in the engin bay, i paln on fixing the problem when i pull the motor to freashen it up. it wil take a lil time to do becouse im a singel dad and my lil girl has started school and another problem thats not in the pic is that the passager fender is alil buggered up. i plan on fixing it or just replace it with another fender. i also would like it to be painted agin becouse there is big time fading on the roof and trunk lid. if anybody spots something out that needs to be fix please point it out

 

[R3dline]

i like it man, looks really good now. your not that far from us bham guys

 

[civicmand16y7]

i like it man, looks really good now. your not that far from us bham guys

nope 45 mins or so depens on how fast i drive it takes 30 40 mins to get to the pull aparts place in tarrent...that my home away from home..lol

 

[evilrilla2]

so the first picture u post is not the latest picture?

 

[civicmand16y7]

so the first picture u post is not the latest picture?

no sir. the last 2 pic are the newst ill take some from the front tomorrow and post them up

 

[civicmand16y7]

just an update: i cant pull the mini me out and drop the y5 in I sold the y5. But for the car nothing has been done to it seance ive posted the pics But ideas and suggestion and comments are still welcome
NOTE: IM LOOKING FOR A P28 ECU

 

[yellowbone12]

looks good so far....

 

[civicmand16y7]

looks good so far....

Thanks man

 

[civicmand16y7]

UPDATE: i swaped out deck lids that has lil to no scratchs and NO fading of the paint. It also dont have the feet pads from the wing. Now i have a vtec sticker on the deck lid as well. For the inside. I now have NRG innovations racing seats..very very very comfy. Im going to try and get new pic up asap... its kinda hard seance i dont have a way to take any... I also for got to say that i have jdm rota..that what ive been tould i dont know..if anyone can tell me how i can tell if there jdm please do and ill let yall know if they are or not

 

[paulx022]

UPDATE: i swaped out deck lids that has lil to no scratchs and NO fading of the paint. It also dont have the feet pads from the wing. Now i have a vtec sticker on the deck lid as well. For the inside. I now have NRG innovations racing seats..very very very comfy. Im going to try and get new pic up asap... its kinda hard seance i dont have a way to take any... I also for got to say that i have jdm rota..that what ive been tould i dont know..if anyone can tell me how i can tell if there jdm please do and ill let yall know if they are or not

its spelled SINCE!!! not seance.. and rota is a brand and jdm is Japanese domestic market so i mean if they are rotas and came from japan i guess it is.

 

[civicmand16y7]

its spelled SINCE!!! not seance.. and rota is a brand and jdm is Japanese domestic market so i mean if they are rotas and came from japan i guess it is.

it says that they are made in Taiwan...and the center cap says Nippon Racing. Yokohama Japan

 

[civicmand16y7]

UPDATE TIME: just got another EJ1 parts car with an aftermarket rack and pinion. rear disc conversion with drilled rotrs and it also have eibach lowering springs and a short throw shifter. it also has a lip (not sure what kind) and some fog lights and fiberglass hood that looks like my carbon fiber hood. NOT bad huh all i had to give up was one of my fox body mustangs ohhh trust me i got some boot to so im going to take off the rack and pinion and the rear disc conversion and put them on to my car and im just going to swap out bumpers lol again.lol so ill have the lip and the fog lights. then i guess ill eaither part out the car or just turn it in to a full blown drag car...what would yall do with the parts car????