Nitrous kit installed....

[Paul2281]

Well I bought this kit on ebay....2 nitrous solenoids with a press. reg. and a press. line going to the fuel reg. and to the intake manifold....Plus the dry nitrous line going to CAI......Tried it initially with a 26 jet(25hp) to see if all was ok.....Tried it out,plugs looked ok, with about 4 degree`s out to be safe.....I got the 36 jet in there now and will try it out tomorrow....

 

[Paul2281]

Tried to down load a few pic.`s copy and paste but no go????

 

[civicsoulja21]

Make sure you dont blow the motor lol, that is the only reason why id never run nitrous haha

 

[Paul2281]

Make sure you dont blow the motor lol, that is the only reason why id never run nitrous haha

Thanks for the warning.....Not a newbie with the juice just new with it on a car.....
I had nitrous on a kawasaki car tire drag bike that ran in the mid 7.`s at 175 mph.....
I just have to take it slow in these cars untill I have something I can work with....
I just ordered a B&M pressure reg.and a gauge ...Might switch to a wet kit soon....

 

[civicsoulja21]

Ok yeah nitrous is not something im smart with lol

To get pics download on photobucket and paste the IMG code in youre response

 

[sohclubkid]

if you ever decide to sell your kit, let me know...

do you race at Bithlo?

 

[XpL0d3r]

Fixed your pics links for ya (you had "http://http://..." inside the IMG tags)

 

[SleepingSol]

nice set up. with a honda though i would recommend switching to a wet and getting some sort of engine management. The system can be tuned and can be activated within the management system. no worries of faulty switches then

 

[Paul2281]

Fixed your pics links for ya (you had "http://http://..." inside the IMG tags)

WOW....Thanks very much....

 

[Paul2281]

nice set up. with a honda though i would recommend switching to a wet and getting some sort of engine management. The system can be tuned and can be activated within the management system. no worries of faulty switches then

Yes I totally agree on the wet kit...Never liked dry kits much....
I found an adapter that will let me tap off the fuel filter to get my fuel.....I did get my ECU massaged....But do like the idea of a management system too.....

 

[Paul2281]

if you ever decide to sell your kit, let me know...

do you race at Bithlo?

I`ve raced my drag bikes there but not my car yet...Pretty good track...I usually race here at Gainesville raceway...I live like 5 miles from it.....

 

[Paul2281]

 

[Paul2281]

Pic. of my work in progress....
My son has a 2door with a B20 and GRS trans. and I am trying to keep up with his car.....Thats why the juice went on...lol....

 

[Paul2281]

I just got done installing an adj. fuel pressure regulator and turned it up to 40 psi....I also bought a fuel press. gauge that goes on the fuel filter fittings but couldn`t get it to seal up good enough to keep it on there....Leaks around the bottom of the head of the adapter bolt even with a new crush washer...I tried a few different ones but still leaks....But got to at least set the regulator.....I`ll get some pic.`s tomorrow.....

 

[charlie brown]

Pic. of my work in progress....
My son has a 2door with a B20 and GRS trans. and I am trying to keep up with his car.....Thats why the juice went on...lol....

is the police interceptor in the back ground up for grabs.

 

[Paul2281]

is the police interceptor in the back ground up for grabs.

Noooooooo.lol....I love my P.I. car....I have that car pumped up better than the locals cop cars....Put a programmer on it,flow masters,cold ait int.....Catches 2nd gear rubber.....

 

[Paul2281]

B&M fpr.....set at 50 psi....

 

[Paul2281]

 

[Paul2281]