if you have no front plate, remove the bototm front LP bracket its 1 bolt if i recall from when i removed mine. looks good bro!
B16a eh2
- Thread starter clopezEG
- Start date
id get a LP tilt, 2slow has 1 its sick. thats what im getting. if you want to relocate ur going to be drilling 2 new holes in ur bumper, and you can make a kit at loes or home depo for under 5 bucks. just need 2 l shaped brackets and a few bolts.
Hmmm i bet that might be it thx for verifying it can be the injectors, is there any way to determine wether it is the injectors or if its the valves?
Edit: i also wana add that my injectors move around , as in i can sit there and turn them left to right but they dont slide up or down ... It concerns me that i can turn them and on all my buddies B-series theyre prett solid
Since its bills week funds are low... BUT!
im planning on painting my valve cover since it shouldnt be too pricy ima use the write up
http://www.clubcivic.com/board/showthread.php?t=98074&page=9
Hope it comes out good
Edit: didnt happen... Next week tho for sure
im planning on painting my valve cover since it shouldnt be too pricy ima use the write up
http://www.clubcivic.com/board/showthread.php?t=98074&page=9
Hope it comes out good
Edit: didnt happen... Next week tho for sure
ran into some issues last night i left my car in reverse since it was on a lil bit of a hill. when i went to go start it i pushed in the clutch turned it on and all i hear is some crazy grinding noise, when i start the car with the shifter in neutral it starts fine BUT i cant shift into any gear except for reverse and when i put it in reverse it grinds, also if i start it while the car is in any other gear it grinds as well not sure what it is already added 10w-30 to the tranny and purged my clutch line but no go im in the prosses of swapping the shift linkage if that doesnt work im goin to drop the tranny and swap the clutch, and take in the tranny to get looked at hopefully i dont have to replace the tranny.
Fiugured it out axles took a dump and so did my clutch... Note to self " never let others drive your car"
Lol here are some pics... Dnt mind the ugly headers plan to get new ones soon
New axles
New clutch installed
Gotta keep it maintained haha oil oil filter air filter are next i did the plugs and wires a month ago so should b good for a while
Also had a buddy take a look at the motor and y its ticking it is my valves those will get fixed this upcoming weekend
Eccited to finally see progres not a lot but hey everytime i do something to my car i feel like its brand new haha
Also got a deck need to rewire the speakers but feont ones work fine
Sub and amp are on stanby for install till i buy my wires to install em
N e ideas on a base for the trunk all i have is the back seat carpet but that wont hold my amp amd sub is there a bottom or do i have to make one
Lol here are some pics... Dnt mind the ugly headers plan to get new ones soon
New axles
New clutch installed
Gotta keep it maintained haha oil oil filter air filter are next i did the plugs and wires a month ago so should b good for a while
Also had a buddy take a look at the motor and y its ticking it is my valves those will get fixed this upcoming weekend
Eccited to finally see progres not a lot but hey everytime i do something to my car i feel like its brand new haha
Also got a deck need to rewire the speakers but feont ones work fine
Sub and amp are on stanby for install till i buy my wires to install em
N e ideas on a base for the trunk all i have is the back seat carpet but that wont hold my amp amd sub is there a bottom or do i have to make one
jpcivic4969
New Member
love the paint is it the electron blue ?
To be honest im not sure the guy i bought the shell from said it was navy pearl like the S2K's but i dont think its the same so It might be but thanks bro the paint is what convinced me to get it, it was either this one or a black one with a white hood bumper and fender and thats pretty much a red flag for me haha
So the exaust started making some noises and i found out y
Keep in mind this exaust came with the shell
Problem found haha
Up close
Old 4 door exaust
I had to chop it down so i lost the angle on the muffler but it sits straight doesnt rattle and still purrs nicely, the old one used to hang and scrape on EVERYTHING beause it would mount up with the rubber strap things (not sure what the name of the rubber pieces are)
First time i have EVER welded Anything haha but it holds
Plan on getting a new muffler cause this ones all jacked up ,
I orders HID's on saturday should get them here pretty soon hopefully by tommorow and i still really want to paint my valve cover so hopefully sunday
Just got an e mail from where i ordered them their barely getting shipped out , i was hoping to have them today
Keep in mind this exaust came with the shell
Problem found haha
Up close
Old 4 door exaust
I had to chop it down so i lost the angle on the muffler but it sits straight doesnt rattle and still purrs nicely, the old one used to hang and scrape on EVERYTHING beause it would mount up with the rubber strap things (not sure what the name of the rubber pieces are)
First time i have EVER welded Anything haha but it holds
Plan on getting a new muffler cause this ones all jacked up ,
I orders HID's on saturday should get them here pretty soon hopefully by tommorow and i still really want to paint my valve cover so hopefully sunday
Just got an e mail from where i ordered them their barely getting shipped out , i was hoping to have them today
Last edited:
beautiful hatch man love the progress and how far uve come. great color. and love the head lights... i live in orlando and it seems no one knows how to put in their new amber corners they all look so stupid cause they stick out as if they dont fit.... but you on the other hand have them snug and clean and it looks great!
Yea its bad here in colorado people are grimy as f**k,
All i gotta say iss good luck to the person that stole my things cause karma is a big bad b*tch, and if i find out who did it its over haha but same here my old four door got stolen 6 times from the guy i bought it from and well ... Yea that car was bad luck i dont want to get into it haha
Thanks bro! Its a never ending process, im hoping i can find some SI tail lights that would b dope,
And a lot of people dont pay attention to detail , they dont jnderstand that 4 door corners wont fit a coupe or hatch but they use em e way haha , thanks again ! Ur hatch is nice as well!