freddyrules
Code Blue
man your lucky a b18c for 500!!!!!!!!!!!! nice build man cant wait till its done and how much did you buy the clutch for and where?
Juice's Eee Gee Ate
- Thread starter MistahJuice
- Start date
Thanks for all the support guys I'm pretty stoked. Counting down the days till I get to switch to premium gas 
lol. Oh and I got most of my stuff; arp studs, clutch kit, radiator and hoses etc from here 
lol. Truthfully Jay Jay has some of the best prices on the web for most of what I was looking for. Kinda sounds advertisey (whatever that means) but it's the truth just head over to the clubcivic store or the tunersports store and check out the prices. 
lol. Oh and I got most of my stuff; arp studs, clutch kit, radiator and hoses etc from here lol. Truthfully Jay Jay has some of the best prices on the web for most of what I was looking for. Kinda sounds advertisey (whatever that means) but it's the truth just head over to the clubcivic store or the tunersports store and check out the prices. I may be wrong(and sorry if I am)but I'm pretty sure you can advertise CC and TS stuff on CC. lol. Can't wait to see some more updates.
Lol yeah I know, just trying to say I'm not getting anything outta advertising for here more than anywhere else, just good deals.
ANYWAY did the yesterday today, went like cake
. Haven't wired anything up yet so can't really say I'm finished 
, but new motors in and mounted up. Had to do it quick cuz we borrowed the hoist from a friend that needed it and had to get it back, not to mention I had work at 4, so all we did was pull the old motor, put the new one in, and rip out the automatic components (shifter, etc). Nonetheless should have it done by today if all goes well, here's some pics
10am
2pm
ANYWAY did the yesterday today, went like cake
. Haven't wired anything up yet so can't really say I'm finished , but new motors in and mounted up. Had to do it quick cuz we borrowed the hoist from a friend that needed it and had to get it back, not to mention I had work at 4, so all we did was pull the old motor, put the new one in, and rip out the automatic components (shifter, etc). Nonetheless should have it done by today if all goes well, here's some pics10am
2pm
moar!!!!!lol yeah i know, just trying to say i'm not getting anything outta advertising for here more than anywhere else, just good deals.
Anyway did the yesterday today, went like cake :d . Haven't wired anything up yet so can't really say i'm finished
10am
2pm
You should wire tuck your bay at some point! it would look great!
Well wiring was a b***h, not even the auto to manual part, it was just wiring the IAB and the evap purge and what not, that was annoying and I did it differently then most of the guides I read, but no cel so guess I got it right. And well, I didnt have the pin to put in the shift linkage so we used a bolt but that IS NOT working well, makes it hard to go into 5th/reverse so got the pin and clip at Honda today, not to mention my bud put the gsr shifter in backwards 
so had to turn that around this morning. Anyway without further adeui THE nearly FINISHED PRODUCT:
Looking good
Pedobear checkin on some wires for me
Just finished wiring safety switch and what not. You can see the shifter on backwards, friends a dumbass lol
And one of these shots cuz its like the myspace bathroom pic of the car world lol
so had to turn that around this morning. Anyway without further adeui THE nearly FINISHED PRODUCT:Looking good
Pedobear checkin on some wires for me
Just finished wiring safety switch and what not. You can see the shifter on backwards, friends a dumbass lol
And one of these shots cuz its like the myspace bathroom pic of the car world lol
Nice!
Thanks, it drives awesome, way more power then the D, of course I only got to drive it for a day and now my suspension f***ed up on me. Axles are brand new though and when I looked at it only thing I could see was a bolt was either pushed out or not there in passenger side knuckle so hopefully that's the only problem. That or hopefully the passenger side axle actually did brake because I can get that replaced free. Any other problems and I just might bash my face through my bedroom wall lol
Well turns out there was a bolt in the knuckle loose and also the top caliper bolt. Bolts came loose caliper swung down and the sound was the caliper bouncing around on the inside of the wheel. But needless to say I'm BEYOND relieved lol
But needless to say I'm BEYOND relieved lol
looks nice thoughdamn, how f**ked up is the rim, rotor, and caliper?Well turns out there was a bolt in the knuckle loose and also the top caliper bolt. Bolts came loose caliper swung down and the sound was the caliper bouncing around on the inside of the wheel.
Looks good otherwise and loving the VC.
haha yeah it does
No real bad damage, I was on a windy back road so I had to keep driving but soon as I got off I parked at a friends house, just scraped the caliper and inside of the steelie a little. Not that it matters that much cuz I GOT NEW RIMS! lol
Their 15inch white rota grids with blue muteki lugs
man, those look nice. glad nothing bad happened.
@walkingcomplex: Thanks. It took a while for me to decide but Im definitely loving them. And yeah I was pretty happy that there wasn't a major problem.
@swag: haha if I het it painted the color I want it'll be even easier to find me lol. Seriously though next time u come out here hit me up, we could hit In-N-Out and have lunch, I'd love to actually meet a fellow civic lover/member of this site lol.
@swag: haha if I het it painted the color I want it'll be even easier to find me lol. Seriously though next time u come out here hit me up, we could hit In-N-Out and have lunch, I'd love to actually meet a fellow civic lover/member of this site lol.