Stick the actuator on, run it without the boost controller to make sure it works properly. Install MBC with it adjusted all the way out, then adjust it until you hit 20psi.
Help in choosing internal actuator
- Thread starter D16Y6
- Start date
the current actuator is very short rod as i said which cause delay.Stick the actuator on, run it without the boost controller to make sure it works properly. Install MBC with it adjusted all the way out, then adjust it until you hit 20psi.
adjusting MBC from less psi to higher? this is what you trying to say?
sorry for my english its not my first language
Sent from my GT-I9000 using Tapatalk
Then that actuator is messed up or doesnt work properly with your turbo. Yes unscrewing a MBC (making it longer) is less boost because the spring isnt compressed as much and it takes less pressure to move the ball/spring
pretty clearThen that actuator is messed up or doesnt work properly with your turbo. Yes unscrewing a MBC (making it longer) is less boost because the spring isnt compressed as much and it takes less pressure to move the ball/spring
what about the vacum source from where you will take. btw the existing source is from compressor nippl.
Sent from my GT-I9000 using Tapatalk
MBC goes inline from the compressor to actuator, make sure the ball side of the MBC is towards the compressor.pretty clear
what about the vacum source from where you will take. btw the existing source is from compressor nippl.
Sent from my GT-I9000 using Tapatalk
i will insure that. still waiting waiting for the stuff i purchased to arrive. international shipping taking time :-(MBC goes inline from the compressor to actuator, make sure the ball side of the MBC is towards the compressor.
Sent from my GT-I9000 using Tapatalk