98 civic, 183k miles. Timing belt is at the point of needing changed. Went to start it this am, cranked over normal, engine caught and started to run and died immediately. Went to crank again, cranked but didnt sound like the whole motor was turning and wouldnt start. I never heard any knocking sounds, either when it tried to run or when I cranked it after. Is it possible the belt broke or stripped and nothing else broke? I know it is supposedly an interference engine, but I would have thought I would have heard something knock if the piston hit a valve? Any other ideas on what could have happened?
Help Diagnose Engine Prob Please
- Thread starter Racinfan83
- Start date
U need to take s**t off and start checkin things
Sent from my LS670 using Tapatalk
Sent from my LS670 using Tapatalk
This happened as I was going to work this morning, didnt have time to diagnose it, jumped in my truck and left. The starter sounded like it was cranking part of engine but def didnt sound normal. Im just trying to get some ideas before I get home... And very curious if it is even possible that the belt could break without making a knock or hurting anything in the engine?
RonJ
Banned
The timing belt can break anytime the engine is turning or running.
You can tell whether the starter turns the engine simply by watching the drive belts. If they turn, the engine is cranking.
If you are unwilling to do any type of simple diagnostic tests, then you are left with replacing parts at random. I hope you have plenty of available cash if this is your chosen approach to solving car problems.
Dude - I was at WORK - I was asking for help so I knew what to start looking at when I got HOME...SHEESH..
Starter cranks engine over. Took dist cap off - the rotor turns when you crank it. Thinking that means belt is still good. Now I'm kinda stumped...
Starter cranks engine over. Took dist cap off - the rotor turns when you crank it. Thinking that means belt is still good. Now I'm kinda stumped...
RonJ
Banned
Ok. Had fuel, had spark, no codes. Wife was cranking it over while I had a plug wire off checking spark, and it acted like it wanted to fire. So I put plug wire back on, wife cranked it and she was pumping the gas pedal like u do on a non-fi engine and it started. (against my better judgement, but it was the wife and I know better then to tell her she's doing it wrong) Smoked gas fumes like a mofo for a bit - has run like a champ since. My only thought is somehow it flooded when it didnt start right the first time?
Try doin a fuel pressure test might be gettin build up or blockage somewhere
Sent from my LS670 using Tapatalk
IM Shure this video will help
http://www.youtube.com/watch?v=064Ilsz8Fzg
And this websight im haveing the same problem
it goes ch-ch-ch-ch but no start
http://techauto.tripod.com/
http://www.youtube.com/watch?v=064Ilsz8Fzg
And this websight im haveing the same problem
it goes ch-ch-ch-ch but no start
http://techauto.tripod.com/
lowandslowek
New Member
good luck
I'd change that timing belt asap... and just curious but were you low on gas?