Auto to Manual ALMOST

irawkian_EK9

New Member
ok so... I recently did a auto to manual conversion to my 2000 hatch... Tranny in - harness in and grounded - all grounds grounded - ECU plugged in - Car wont start..... turns strong but doesnt turn over.... i rechecked the harness.. all plugged up... auto box is in park... and tried cranking it in neutral... 5 speed tranny in neutral... help please... im sure otthers had this problem before

:cry::???:
 

JustJustin

New Member
Registered VIP
5+ Year Member
Make sure to push the clutch in when you go to crank it. :lol:
 


JDM_SPEC_SI-R

New Member
Registered VIP
5+ Year Member
dizzy plugged in? i remember my car wouldn't start, then i remembered i forgot to plug my dizzy back in.... it turned but didnt crank over. sounds like it wants to go, so check things other than the swap, stuff in the engine that may not cause it to start. if its cranking im sure you probably hooked everything up. it may just be something else.... ecu plugged correctly????
 

MistahJuice

100% real juice
Registered VIP
5+ Year Member
10+ Year Member
If you turn the key into on do u hear fuel pump prime and main relay click. Are you getting fuel and everything. Are u sure the ecu was working prior to install? I don't remember all the wiring I did for this but I do remember it not giving the key back and a whole bunch of other stuff so maybe u should recheck wiring.

Double check you did everything right, including the whole iacv thing
http://honda-tech.com/showthread.php?t=1337459
 

irawkian_EK9

New Member
Still having issue... Car is getting Spark / and Fuel..... We Recently came across a timing issue... it was off timing by 90 deg.... Timing has been set.. All Grounds are properly bolted down ECU Plugged in... Dizzy Plugged....Has Fuel... Car motor Turns Strong! But doesnt Crank up completely.......But there is one question... does the clutch pedal have to be wired to crank considering its Auto to manual conversion... Someone told me no.... Long as Auto Box clicker is in [P]ark... Please Help if any suggestions... Thank You..
 
You must log in or register to reply here.


Top