Question about Auto to Manual Converson

[santacluz]

Im about to convert my auto to manual but before I did I found I dont have the holes for master cylinder is welded with the same shape.

Is there anyway toTake it off instead of drilling whole?..


http://smg.photobucket.com/albums/v185/D_Block/?action=view&current=DSCN5046.jpg

 

[spooned209]

Possible grind but then u got a fire possibility lol other then that i dont think so but lets see if anyone else has better idea

 

[MistahJuice]

Are you sure it's welded, like did you actually try to take it of or just look at it. Mine and every other one I've heard of was just a piece of plastic or sheet metal or something, it wasn't actually welded on there. If it is welded then I'd drill it out from the inside.

 

[cgpEJ6]

Are you sure it's welded, like did you actually try to take it of or just look at it. Mine and every other one I've heard of was just a piece of plastic or sheet metal or something, it wasn't actually welded on there. If it is welded then I'd drill it out from the inside.

I honestly don't even remember that part which tells me it wasn't that big of a deal. You could probably just get it off with a flathead screwdriver and a hammer.

 

[santacluz]

Thanks guys,Actually is not welded it just two bolts where the clutch pedal goes..Yes is a metal sheet with bolts,Took it off and put the master cylinder..

 

[MistahJuice]

Yeah I remembered it being something like that. Glad to hear it all worked out