civic front and driver door sensor not working

[reg_lus]

The Front driver and passenger door sensor isn't working. But the rear works fine.
(the sensor is the one when you open your door and the dome light comes one/ or could be for alarm)

I noticed that the driver side plug is missing but the sensor is still there...
I tried looking the damn wire but couldn't find it.
So then I went to the passenger side, everything is there but I don't know why it isn't triggering my dome light or alarm.

Would it be possible if i can re-wire this? If anyone knows, it would be a great help.
Or
Can I just hook up the wire from the 2 rear door (which works) to the front? I dont think it will short will it?

 

[RonJ]

Driver door switch -- controlled by Grn/Blu wire from the integrated control unit plugged into the back of the dash fuse box. Run new wire from there.

Passenger door switch - Check the Grn/Red wire for continuity between the door switch and ceiling light. If it's good, test the switch.

 

[reg_lus]

Driver door switch -- controlled by Grn/Blu wire from the integrated control unit plugged into the back of the dash fuse box. Run new wire from there.

Passenger door switch - Check the Grn/Red wire for continuity between the door switch and ceiling light. If it's good, test the switch.

Thanks! I'll go check right now.

 

[RonJ]

If it's good, test the door switch.