Question!!

Arizzown

New Member
My 99 Em1 is running on around 49 psi on the fuel gauge thing, im not sure what it should be running. kinda new to this thing so thanks for the help!
 

AssyrianKid

New Member
not sure but its probably somewhere on the forum, when you find out if it's wrong you can mostly likely bring it to what it should be by doing a tune up (Changing spark plugs, spark plug wires, and if you need it rotor & distrubor cap)
 


Reedy17

New Member
According to Haynes an em1 at idle should be 30-37 psi at idle with the regulator hose connected and 40-47 without it connected
 

calok

New Member
im trying to fix honda civic 2000, its not running for one year and a half. I already drain old gas from the tank, i also change fuel pump, change fuel filter, air filter, change oil, trans. fluid, all fuses is ok . and still wont start, the engine rotates but wont start, by the way i also chane the spark plug, dist. cap and the rotor. pls help me guys,
 


Reedy17

New Member
im trying to fix honda civic 2000, its not running for one year and a half. I already drain old gas from the tank, i also change fuel pump, change fuel filter, air filter, change oil, trans. fluid, all fuses is ok . and still wont start, the engine rotates but wont start, by the way i also chane the spark plug, dist. cap and the rotor. pls help me guys,
check the spark first then id say check the coil inside the dist cap and under the rotor, also listen when you click your key forward to see if you can hear the fuel pump turn on
 


Top